Perfect.
Yes, on the pretend option, I cannot remember what it was in the 1.x
branch, but I'm looking for an option to run and output what it 'would
have done' without actually doing anything. Meaning, I found this
information to sync, and this is where it will go.
Hope that makes sense.
Thanks,
Shannon
On Tue, 8 Nov 2011 17:58:26 +0100, Sébastien Bahloul wrote:
Hi Shannon,
You may remove or ignore the serverType which is used only when
binding
to the source directory in a asynchronous "on-the-fly"
synchronization
mode: this is a mode that starts the LSC as a daemon and pull the
directories for updates and the Active Directory way is not currently
supported by the LSC.
Can you give me some explanations about the pre-run/pretend need ?
Regards --
Sebastien BAHLOUL
IAM / Security specialist
Ldap Synchronization Connector : http://lsc-project.org [12]
Blog : http://sbahloul.wordpress.com/ [13]
2011/11/8 Shannon
Excellent.
I see OpenLDAPserverType>. Can you tell me the other options,
specifically for AD?
Also, is there a pre-run/pretend command line option?
Thanks again!
Shannon
On Tue, 8 Nov 2011 11:40:47 +0100, Sébastien Bahloul wrote:
Hi Shannon,
Please find attached a sample that synchronize two directories. As
you
will see the source and destination settings are almost the same.
Regards --
Sebastien BAHLOUL
IAM / Security specialist Ldap Synchronization Connector :
http://lsc-project.org [4] [4]
Blog : http://sbahloul.wordpress.com/ [5] [5]
2011/11/7 Shannon
Good day.
Using the example lsc.xlm-sample, I see the necessary parameters
below for destination ldap services, but the example uses a db
for the
source. I didn't see any updated documentation for the 2.0 branch
(sorry if I missed it).
Can you provide a same source ldap service config with some
comments,
or is the same, or?? For reference, this will be used to sync AD
to
OpenLDAP/389 Server.
> ldap-dst-service
ou=People,dc=test,dc=com
mail
cn
sn
givenname
objectClass
uid
mail
(objectClass=inetorgperson)
(&(objectClass=inetorgperson)(mail={mail}))
Also, I see a doc that talks about the -a -l -s options, but was
wondering if there was a 'pretend' or do-nothing option like on
the
1.x
branch.
Thanks,
Shannon
_______________________________________________________________
Ldap Synchronization Connector (LSC) - http://lsc-project.org [1]
[1]
lsc-users mailing list
[email protected] [2] [2]
http://lists.lsc-project.org/listinfo/lsc-users [3] [3]
Links:
------
[1] http://lsc-project.org [6]
[2] mailto:[email protected] [7]
[3] http://lists.lsc-project.org/listinfo/lsc-users [8]
[4] http://lsc-project.org [9]
[5] http://sbahloul.wordpress.com/ [10]
[6] mailto:[email protected] [11]
Links:
------
[1] http://lsc-project.org
[2] mailto:[email protected]
[3] http://lists.lsc-project.org/listinfo/lsc-users
[4] http://lsc-project.org
[5] http://sbahloul.wordpress.com/
[6] http://lsc-project.org
[7] mailto:[email protected]
[8] http://lists.lsc-project.org/listinfo/lsc-users
[9] http://lsc-project.org
[10] http://sbahloul.wordpress.com/
[11] mailto:[email protected]
[12] http://lsc-project.org
[13] http://sbahloul.wordpress.com/
[14] mailto:[email protected]
_______________________________________________________________
Ldap Synchronization Connector (LSC) - http://lsc-project.org
lsc-users mailing list
[email protected]
http://lists.lsc-project.org/listinfo/lsc-users
