Hi Tony,
On 10/08/2020 16:21, [email protected] wrote:
Hi Peter,
The flex-algo draft mentions "Min Unidirectional Link Delay as
defined in [RFC7810 <https://tools.ietf.org/html/rfc7810>]". When
reading RFC7810, I found two Sub-TLVs:
4.1. Unidirectional Link Delay Sub-TLV 4.2. Min/Max Unidirectional
Link Delay Sub-TLV
Could you please clarify which one should be used? If "Min/Max
Unidirectional Link Delay Sub-TLV" is used, will the max delay
carried in the subTLV be ignored?
flex-algo as defined in the draft uses "Min Unidirectional Link
Delay", which is advertised in the "Min/Max Unidirectional Link Delay
Sub-TLV".
The fact that the "Min/Max Unidirectional Link Delay Sub-TLV" carries
some other data (e.g. Max delay) is orthogonal to the flex-algo usage.
Could we please clarify this by adding a reference to the specific section?
which specific section do you have in mind?
thanks,
Peter
Thanks,
Tony
_______________________________________________
Lsr mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/lsr
