Hi Peter,
>>>> The flex-algo draft mentions "Min Unidirectional Link Delay as defined in
>>>> [RFC7810 <https://tools.ietf.org/html/rfc7810>]". When reading RFC7810, I
>>>> found two Sub-TLVs:
>>>> 4.1. Unidirectional Link Delay Sub-TLV 4.2. Min/Max Unidirectional Link
>>>> Delay Sub-TLV
>>>> Could you please clarify which one should be used? If "Min/Max
>>>> Unidirectional Link Delay Sub-TLV" is used, will the max delay carried in
>>>> the subTLV be ignored?
>>>
>>> flex-algo as defined in the draft uses "Min Unidirectional Link Delay",
>>> which is advertised in the "Min/Max Unidirectional Link Delay Sub-TLV".
>>>
>>> The fact that the "Min/Max Unidirectional Link Delay Sub-TLV" carries some
>>> other data (e.g. Max delay) is orthogonal to the flex-algo usage.
>> Could we please clarify this by adding a reference to the specific section?
>
> which specific section do you have in mind?
In the flex algo draft, in section 5.1, you current have the text:
1: Min Unidirectional Link Delay as defined in [RFC7810
<https://tools.ietf.org/html/rfc7810>].
Could you please change that to:
1: Min Unidirectional Link Delay as defined in [RFC7810
<https://tools.ietf.org/html/rfc7810>] Section 4.2.
Thanks,
Tony
_______________________________________________
Lsr mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/lsr
