Hi! > > > > > > What was the error message, same as previous? > > > > > > > Here we go. > > > > ... > > mount: wrong fs type, bad option, bad superblock on /dev/loop1, > > missing codepage or helper program, or other error > > In some cases useful info is found in syslog - try > > dmesg | tail or so > > > > FATAL: can't mount block device /dev/loop1. > > mke2fs 1.42 (29-Nov-2011) > > mkfs.ext4: Device size reported to be zero. Invalid partition specified, or > > partition table wasn't reread after running fdisk, due to > > a modified partition being busy and in use. You may need to reboot > > to re-read your partition table. > > > > 102400+0 records in > > 102400+0 records out > > 102400000 bytes (102 MB) copied, 0.542412 s, 189 MB/s > > ... > > > > # dmesg | tail > > ... > > [ 1179.820940] EXT4-fs (loop1): VFS: Can't find ext4 filesystem > > Hmm, it seems like something went wrong with the loop device setup (as > if no device was attached but the error was silently ignored). > > (And I wonder why the messages seems to be in reverse order, the > messages from dd should have been first, then mkfs and then mount).
Hmm, if I remeber correctly there dash that is used as /bin/sh on Debian (and supposedly on Ubuntu) that does not understand the &> syntax so the messages may be reversed because the commands are executed on background (instead of the output redirected to /dev/null). Try to remove all '&> /dev/null' from the script and try again. -- Cyril Hrubis [email protected] ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Ltp-list mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ltp-list
