Hello all,
Problem:
Cannot connect to the DHCP server. Receiving the following error message:
"TX Timeout!"
"<sleep>"
My setup:
Hardware:
Using a diskless IBM PC 300GL w/16MB ram
disklessworkstations Linksys LNE 100TX nic (Tulip ADMtek AN985 chipset)
3com office connect e-net hub
Software:
lts_core-2.0.8-0.i386.rpm
lts_kernel_tulip-2.2.0.i386.rpm
Red Hat 7.1
Diagnosis so far:
I've verified that the hub and cables are working properly. I am seeing no
network activity using tcpdump. dhcpd is running on the server and the
necessary ltsp configuration files are configured properly as far as I can
tell. According to another post I read, the "<sleep>" messages indicate a
dhcp configuration problem, but the "TX Timeout!" indicates the nic is having
trouble sending the dhcp broadcast packets. The nic card is working because I
get the following at boot:
"Bootrom v1.6
"Etherboot/32 version......
"Found ADMTek......
"Probing.....xx:xx:xx:xx:xx:xx
"Searching for server (DHCP)....."
And like I said the cables and hub are good.
Any ideas?
cheers,
Tim
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
