Tim, I'd suggest trying a different hub, or a cross-over cable directly betwen the server and workstation, just to rule out any negotiation problems between the Linksys card and the hub.
Other things worth trying are: 1) Try a different slot in the computer 2) Try the Linksys card in a different computer 3) See if there are any bios upgrades available for your computer Hope that helps, Jim McQuillan [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: >Hello all, > >Problem: >Cannot connect to the DHCP server. Receiving the following error message: >"TX Timeout!" >"<sleep>" > >My setup: > Hardware: > Using a diskless IBM PC 300GL w/16MB ram > disklessworkstations Linksys LNE 100TX nic (Tulip ADMtek AN985 chipset) > 3com office connect e-net hub > > Software: > lts_core-2.0.8-0.i386.rpm > lts_kernel_tulip-2.2.0.i386.rpm > Red Hat 7.1 > >Diagnosis so far: > >I've verified that the hub and cables are working properly. I am seeing no >network activity using tcpdump. dhcpd is running on the server and the >necessary ltsp configuration files are configured properly as far as I can >tell. According to another post I read, the "<sleep>" messages indicate a >dhcp configuration problem, but the "TX Timeout!" indicates the nic is having >trouble sending the dhcp broadcast packets. The nic card is working because I >get the following at boot: >"Bootrom v1.6 >"Etherboot/32 version...... >"Found ADMTek...... >"Probing.....xx:xx:xx:xx:xx:xx >"Searching for server (DHCP)....." > >And like I said the cables and hub are good. > >Any ideas? > >cheers, >Tim > > > >_____________________________________________________________________ >Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss >For additional LTSP help, try #ltsp channel on irc.openprojects.net > _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
