28th September 2001.
Hi friends,
Finally I managed to get X on the disk less work station. Now
the problem is login window is not appearing. A screen with' X'
mark on the center is appearing in my node and the system is
getting hanged. In my server, the default desktop is KDE.
Please suggest me how to get the login windows. I am attaching
my lts.conf file for your reference.
Regards,
Vinod.
#
# Config file for the Linux Terminal Server Project (www.ltsp.org)
#
[default]
#[ws001]
SERVER = 192.168.0.254
XSERVER = XF86_SVGA
XDM_SERVER = 192.168.0.254
X_MOUSE_PROTOCOL = "PS/2"
X_MOUSE_DEVICE = "/dev/psaux"
X_MOUSE_RESOLUTION = 400
X_MOUSE_BUTTONS = 3
USE_XFS = N
LOCAL_APPS = N
LOCAL_WM = N
UI_MODE = GUI
#------------------------------------------------------------------------------
#
# Example of specifying X settings for a workstation
#
[default]
X_RES_1 = 800x600
X_HORZSYNC = 30-54
X_VERTREFRESH = 50-120
X_MODE_800x600=40 800 840 968 1056 600 601 605 628 +hsync +vsync
MODULE_01 = agpgart.o
#------------------------------------------------------------------------------
#
# Example of a workstation configured to load some modules
#
#[default]
# MODULE_01 = agpgart.o # This is for i810 video
# MODULE_02 = uart401.o
# MODULE_03 = sb.o io=0x220 irq=5 dma=1
# MODULE_04 = opl3.o
#------------------------------------------------------------------------------
#
# Example of ws001 configured for local apps
#
#[ws001]
[default]
LOCAL_APPS = N
LOCAL_WM = Y
NIS_DOMAIN = ltsp
NIS_SERVER = 192.168.0.254
#------------------------------------------------------------------------------
#
# Example of a serial printer attached to /dev/ttyS1 on workstation ws001
#
[ws001]
PRINTER_0_DEVICE = /dev/ttyS1
PRINTER_0_TYPE = S # P-Parallel, S-Serial
PRINTER_0_PORT = 9100 # tcp/ip port: defaults to 9100
PRINTER_0_SPEED = 9600 # baud rate: defaults to 9600
PRINTER_0_FLOWCTRL = S # Flow control: S-Software (XON/XOFF),
# # H-Hardware (CTS/RTS)
PRINTER_0_PARITY = N # Parity: N-None, E-Even, O-Odd
# # (defaults to 'N')
PRINTER_0_DATABITS = 8 # Databits: 5,6,7,8 (defaults to 8)
#------------------------------------------------------------------------------
#
# Example of setting the ramdisk size to something other than the
# default of 1024k ( 1mb ). Make sure you also tag your kernel with
# and specify the new ramdisk size.
#
[ws001]
RAMDISK_SIZE = 8192
#
