Matt, I've never been successful at using the SVGA Xserver with the S3 chipsets. Although, I suppose there are people who have pulled it off.
It should just be a matter of setting XSERVER = XF86_SVGA What I usually see is fonts that look like barcodes. Jim. Matt Clark wrote: > On Wednesday 26 December 2001 12:35, Jim McQuillan wrote: > >>Mike, >> >>Someone pointed you to the wrong X package for your card. >> >>The SVGA package does not support the S3 chipsets. >> >>The package you need is ltsp_x336_s3 >> >> > > Hi Jim, > In my experience, the svga driver works better for S3 cards than the s3 > driver. Is LTSP set up so that S3 cards can't be run with the svga driver? > I havn't tried this myself yet, but what would happen if Mike forced it to > load the svga driver in lts.conf? > > mattc > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
