Hi all,
I am not able to see kde login screen from client
The env I have,
1) Both server & client having same hadware
a)intel 815EEA desktop motherboard
b) onboard lan,sound,display of i810
c) ram : 256 MB
d) video ram 4 MB
e) both machines are connected with each other on
cross cable.
f)OS : mandrake 8.1
g) client is booting by floppy.
my workstation ip is 192.168.1.185
& server ip: 192.168.1.153
I have entry of host in /etc/hosts
I have dhcpd.conf as follow
# Sample configuration file for ISCD dhcpd
#
# Don't forget to set run_dhcpd=1 in /etc/init.d/dhcpd
# once you adjusted this file and copied it to
/etc/dhcpd.conf.
#
ddns-update-style ad-hoc;
default-lease-time 21600;
max-lease-time 21600;
subnet 192.168.1.0 netmask 255.255.255.0 {
#option subnet-mask 255.255.255.0;
option broadcast-address 192.168.1.255;
option routers 192.168.1.153;
option domain-name-servers 192.168.1.153;
option domain-name
"mandrakeserver.softcell.co.in";
option root-path
"192.168.1.153:/opt/ltsp/i386";
#option root-path
"192.168.1.153:/tftpboot/lts/ltsroot";
option font-servers 192.168.1.153;
option x-display-manager 192.168.1.153;
#option option-129 "console=/dev/tty2";
#shared-network WORKSTATIONS {
# subnet 192.168.0.0 netmask 255.255.255.0 {
# }
#}
#group {
# use-host-decl-names on;
option log-servers 192.168.1.153;
host ws001 {
# hardware ethernet 00:03:47:40:0C:17;
hardware ethernet 00:03:47:43:9E:46;
fixed-address 192.168.1.185;
# root-path
"192.168.1.153:/opt/ltsp/i386";
# filename
"/lts/vmlinuz.eepro100";
filename "lts/vmlinuz-2.4.9-ltsp-5";
# option option-128 e4:45:74:68:00:00;
#option option-129 " console=/dev/tty2";
# option option-129 "NIC=eepro100";
}
range dynamic-bootp 192.168.1.181 192.168.1.220;
# host ws002 {
# hardware ethernet 00:03:47:43:9E:46;
# fixed-address 192.168.1.180;
# filename "/lts/vmlinuz.eepro100";
#filename "/lts/vmlinuz-2.4.9-ltsp-5";
# option option-128 e4:45:74:68:00:00;
## option option-129 "NIC=tulip";
# }
}
This is my /etc/exports
#
## LTS-begin ##
#
# The lines between the 'LTS-begin' and the 'LTS-end'
were added
# on: Wed Dec 5 09:21:43 IST 2001 by the ltsp
installation script.
# For more information, visit the ltsp homepage
# at http://www.ltsp.org
#
#/lts/ltsroot
192.168.0.0/255.255.255.0(ro,no_root_squash)
/opt/ltsp/i386
192.168.1.185/255.255.255.0(ro,no_root_squash)
/var/opt/ltsp/swapfiles
192.168.0.0/255.255.255.0(rw,no_root_squash)
#/tftpboot/lts/ltsroot
192.168.1.185/255.255.255.0(rw,no_root_squash)
#tftpboot/lts/ltsroot
192.168.0.0/255.255.255.0(ro,no_root_squash)
#
# The following entries need to be uncommented if you
want
# Local App support in ltsp
#
#/home
192.168.0.0/255.255.255.0(rw,no_root_squash)
## LTS-end ##
this is my lts.conf
#
# Config file for the Linux Terminal Server Project
(www.ltsp.org)
#
[Default]
SERVER = 192.168.1.153
XSERVER = auto
X_MOUSE_PROTOCOL = "PS/2"
X_MOUSE_DEVICE = "/dev/psaux"
X_MOUSE_RESOLUTION = 400
X_MOUSE_BUTTONS = 3
USE_XFS = N
LOCAL_APPS = N
RUNLEVEL = 3
#------------------------------------------------------------------------------
#
# Example of specifying X settings for a workstation
#
[ws001]
XSERVER = auto
LOCAL_APPS = N
USE_NFS_SWAP = N
SWAPFILE_SIZE = 48m
RUNLEVEL = 3
[ws002]
XSERVER = XF86_SVGA
LOCAL_APPS = N
USE_NFS_SWAP = N
SWAPFILE_SIZE = 64m
RUNLEVEL = 3
#
# ws004 is my virtual workstation running in a VMware
session
#
[ws004]
DNS_SERVER = 192.168.0.254
XSERVER = auto
X4_BUSID = "PCI:0:15:0"
X_MODE_0 = 800x600
LOCAL_APPS = N
USE_NFS_SWAP = N
SWAPFILE_SIZE = 64m
RUNLEVEL = 5
#------------------------------------------------------------------------------
#
# Example of a workstation configured to load some
modules
#
#[ws001]
# MODULE_01 = agpgart.o # This is for i810
video
# MODULE_02 = uart401.o
# MODULE_03 = sb.o io=0x220 irq=5 dma=1
# MODULE_04 = opl3.o
#------------------------------------------------------------------------------
#
# Example of ws001 configured for local apps
#
#[ws001]
# LOCAL_APPS = Y
# LOCAL_WM = Y
# NIS_DOMAIN = ltsp
# NIS_SERVER = 192.168.0.254
#------------------------------------------------------------------------------
#
# Example of a serial printer attached to /dev/ttyS1
on workstation ws001
#
#[ws001]
# PRINTER_0_DEVICE = /dev/ttyS1
# PRINTER_0_TYPE = S # P-Parallel, S-Serial
# PRINTER_0_PORT = 9100 # tcp/ip port:
defaults to 9100
# PRINTER_0_SPEED = 9600 # baud rate: defaults
to 9600
# PRINTER_0_FLOWCTRL = S # Flow control:
S-Software (XON/XOFF),
# # H-Hardware (CTS/RTS)
# PRINTER_0_PARITY = N # Parity: N-#None,
E-Even, O-Odd
# # (defaults #to 'N')
# PRINTER_0_DATABITS = 8 # Databits: #5,6,7,8
(defaults to 8)
when my client boot from floopy
it goes in run level 3
then i run command
/tmp/start_ws
Then
it tried to start the display
& suddenly screen went blank
& all LEDS of monitor started blinking.
I am using monitor make: LGStudioworks 452V for both
client & server end.
My /var/log/messages is as follows
Jan 4 15:22:10 mandrakeserver dhcpd: DHCPDISCOVER
from 00:03:47:43:9e:46 via eth0
Jan 4 15:22:10 mandrakeserver dhcpd: DHCPOFFER on
192.168.1.185 to 00:03:47:43:9e:46 via eth0
Jan 4 15:22:10 mandrakeserver dhcpd: Dynamic and
static leases present for 192.168.1.185.
Jan 4 15:22:10 mandrakeserver dhcpd: Remove host
declaration ws001 or remove 192.168.1.185
Jan 4 15:22:10 mandrakeserver dhcpd: from the dynamic
address pool for 192.168.1.0/24
Jan 4 15:22:10 mandrakeserver dhcpd: DHCPREQUEST for
192.168.1.185 (192.168.1.153) from 00:03:47:43:9e:46
via eth0
Jan 4 15:22:10 mandrakeserver dhcpd: DHCPACK on
192.168.1.185 to 00:03:47:43:9e:46 via eth0
Jan 4 15:22:11 mandrakeserver dhcpd: DHCPDISCOVER
from 00:03:47:43:9e:46 via eth0
Jan 4 15:22:11 mandrakeserver dhcpd: DHCPOFFER on
192.168.1.185 to 00:03:47:43:9e:46 via eth0
Jan 4 15:22:13 mandrakeserver dhcpd: Dynamic and
static leases present for 192.168.1.185.
Jan 4 15:22:13 mandrakeserver dhcpd: Remove host
declaration ws001 or remove 192.168.1.185
Jan 4 15:22:13 mandrakeserver dhcpd: from the dynamic
address pool for 192.168.1.0/24
Jan 4 15:22:13 mandrakeserver dhcpd: DHCPREQUEST for
192.168.1.185 (192.168.1.153) from 00:03:47:43:9e:46
via eth0
Jan 4 15:22:13 mandrakeserver dhcpd: DHCPACK on
192.168.1.185 to 00:03:47:43:9e:46 via eth0
Jan 4 15:22:13 mandrakeserver rpc.mountd:
authenticated mount request from 192.168.1.185:687 for
/opt/ltsp/i386 (/opt/ltsp/i386)
Jan 4 15:22:15 ws001 syslogd started: BusyBox v0.60.1
(2001.09.28-01:12+0000)
Jan 4 15:22:15 ws001 devfsd[107]: Caught SIGHUP
Jan 4 15:22:15 ws001 devfsd[107]: read config file:
"/etc/devfsd.conf"
Jan 4 15:22:15 ws001 init: Entering runlevel: 2
Jan 4 15:22:16 ws001 init: Switching to runlevel: 3
Jan 4 15:22:23 mandrakeserver kdm[4360]: Greeter
returned non-zero exit code 256
Jan 4 15:22:23 mandrakeserver kdm[4360]: fatal IO
error 104 (Connection reset by peer)
On client end the leds of monitor keep blinking after
1hrs also.
Pl. let me know what could be problem?
I have installed ltsp version rpms.
Thanks in advance.
warm regards,
maheshwar
__________________________________________________
Do You Yahoo!?
Send your FREE holiday greetings online!
http://greetings.yahoo.com
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
