Cyrus,
i'll pass on the advice i got when i asked the same question: go
to http://k12ltsp.org/k12ltsp.html and see the end of the document. good
luck, julius
On Thu, 17 Jan 2002, Cyrus Elder wrote:
> Hello,
>
> I'm htting a wall when trying to change my network settings I had everything up
>and running beautifully, by using the default 192 subnet settings. Now I need to put
>my server on it's own subnet. I changed the DHCPD.CONF, LTS.CONF, and HOSTS. Now when
>I start my workstation it gets an IP (from my new subnet setting) and begins loading
>but it failes when trying to mount NFS. I get the following
>
> mount: 10.100.40.254:/opt/ltsp/i386 on /mnt failed, permission denied
> Mount : nfsmount failed: bad file number
> NFS: mount program didn't pass remote address!
> mount: 10.100.40.254:/opt/ltsp/i386 on /mnt failed: invalid arguement
>
> Did I miss a config file somewhere?? I'm new to LTSP, and Not so new to Linux but
>still pretty green. Any suggestions would be much appreciated.
>
> Cyrus Elder
> NEOnet
> Network Services
> 420 Washington Ave.
> Cuyahoga Falls, Ohio 44221
> (330)-945-9739
>
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
