Nope actually it was the exports file I didn't change. But thanks anyhow Cyrus
----- Original Message ----- From: "Andy Rabagliati" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, January 18, 2002 4:59 AM Subject: Re: [Ltsp-discuss] Changing my subnet. > Perhaps you did not see the lines in /etc/hosts.allow :- > > ## LTS-begin ## > > # > # The lines between the 'LTS-begin' and the 'LTS-end' were added > # on: Sat Nov 3 15:11:27 SAST 2001 by the ltsp installation script. > # For more information, visit the ltsp homepage > # at http://www.ltsp.org > # > > bootpd: 0.0.0.0 > in.tftpd: 172.16. > portmap: 172.16. > > ## LTS-end ## > > the NFS-related line is portmap. > > Cheers, Andy! > > On Thu, 17 Jan 2002, Cyrus Elder wrote: > > > Hello, > > > > I'm htting a wall when trying to change my network settings I had > > everything up and running beautifully, by using the default 192 subnet > > settings. Now I need to put my server on it's own subnet. I changed > > the DHCPD.CONF, LTS.CONF, and HOSTS. Now when I start my workstation > > it gets an IP (from my new subnet setting) and begins loading but it > > failes when trying to mount NFS. I get the following > > > > mount: 10.100.40.254:/opt/ltsp/i386 on /mnt failed, permission denied > > Mount : nfsmount failed: bad file number > > NFS: mount program didn't pass remote address! > > mount: 10.100.40.254:/opt/ltsp/i386 on /mnt failed: invalid arguement > > > > Did I miss a config file somewhere?? I'm new to LTSP, and Not so > > new to Linux but still pretty green. Any suggestions would be much > > appreciated. > > > > Cyrus Elder > > NEOnet > > Network Services > > 420 Washington Ave. > > Cuyahoga Falls, Ohio 44221 > > (330)-945-9739 > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
