Scott,
I just played with Abiword for the first time a couple of days
ago. It was on a full linux box. I had to modify the XF86Config
file, to include 'Module "type1"'.
You can add that setting to the lts.conf file.
Try adding this:
X4_MODULE_01 = type1
That should take care of that problem.
Jim McQuillan
[EMAIL PROTECTED]
Scott Middleton wrote:
> Hi this is my first post to this list so i apologise in advance if this
> question has already been covered.
>
> When i start Abiword on a remote terminal i get a error message saying
> the font Times_new... is not installed. I know this is not just a LTSP
> problem because i also have the same problem before i used LTSP and i
> was only using X terminal from a remote console.
>
> It does work on the actual server itself no matter who is logged on. So
> i am assuming my font paths are incorrect or Abiword is unable to tell
> it is on a X Terminal.
>
> The Abiword FAQ says to make sure type1 is in the correct path and i
> have done that.
>
> I am sure it is an easy fix but i can't figure it out.
>
>
> Scott Middleton
> Technical Manager
> Linux Services WA
> [EMAIL PROTECTED]
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
