If he has a 3com 3c509 card, the option-129 line should
look like this:
option option-129 "NIC=3c5x9";
The 3c509 doesn't need (or want) the IO= parameter.
Jim McQuillan
[EMAIL PROTECTED]
Egan, Matt B. (Artco) wrote:
> You don't need to add the line
>
> "option option-129 code 129 = text;" line unless you have dhcp V3 or higher
>
> if your running DHPC V2 or some other then all you need to have is this.
>
>
> host ws001 {
> hardware ethernet 00:E0:06:E8:00:84;
> fixed-address 192.168.0.1;
> filename "/lts/vmlinuz-2.4.9-ltsp-5";
> option option-128 e4:45:74:68:00:00;
> option option-129 "NIC=ne IO=0x300";
> }
>
> you don't have to declare the options.
>
> Matt
> -----Original Message-----
> From: lambert Bernard [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, January 23, 2002 2:03 PM
> To: LTSPmailing
> Subject: [Ltsp-discuss] Can't find ethercard realteak
>
>
> HI
>
> I want to start ltsp.
>
> serveur is suse 7.1 kernel 2.2.18 XF 4.10-85, Kde 2.2.1
> pci card clone realtek 8029 irq=11
>
> Station is compaq with 3c509 card
>
> use for test etherboot 5.05 for card 3c509 from floppy
>
> ltsp is 3.0
>
> when i boot the workstation i got an scren error message after running
> /linuxrc
>
> "could not automatically detect network card ... the nic driver to be
> specified in a NIC = parameter"
>
> I look at the ltsp documentation but in did'nt find how can i put in my
> file dhcp.conf option-129 command line
>
> I found in a recent message an exemple but dhcpd stop with an error when
> It read the first line
> "option option-129 code 129 = text;"
>
> could you tell me the syntax ?
>
> regards
>
> _____________________________________________________________________
> Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> For additional LTSP help, try #ltsp channel on irc.openprojects.net
>
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
