You MUST also have option-128 defined in
the dhcpd.conf file, or option-129 will be ignored.
This is what you need:
option option-128 e4:45:74:68:00:00;
option option-129 "NIC=3c509";
Notice the value for option-128. it is NOT a mac address.
it MUST be that value 'e4:45:74:68:00:00'.
Hope that helps,
Jim McQuillan
[EMAIL PROTECTED]
lambert Bernard wrote:
> Hi for everybody
>
> thank for your help
>
> I take off the firs line in the dhcpd.conf file "option option .. " my
> dhcp is 2.05 version.
>
> I have done two tests for the line option-129
>
> one with 3c509 and one other with 3c5x9 but i still get error message
> for the network card.
>
> please at this step is the server network card witch is detected or the
> station card ? that question will seem crazy for you but ..
>
> it is lat in France, i got to bed and hope to read an answer to morrow
> (not ) to day morning
> regards
>
> Jim McQuillan a �crit :
>
>>If he has a 3com 3c509 card, the option-129 line should
>>look like this:
>>
>> option option-129 "NIC=3c5x9";
>>
>>The 3c509 doesn't need (or want) the IO= parameter.
>>
>>Jim McQuillan
>>[EMAIL PROTECTED]
>>
>>Egan, Matt B. (Artco) wrote:
>>
>>
>>>You don't need to add the line
>>>
>>>"option option-129 code 129 = text;" line unless you have dhcp V3 or higher
>>>
>>>if your running DHPC V2 or some other then all you need to have is this.
>>>
>>>
>>> host ws001 {
>>> hardware ethernet 00:E0:06:E8:00:84;
>>> fixed-address 192.168.0.1;
>>> filename "/lts/vmlinuz-2.4.9-ltsp-5";
>>> option option-128 e4:45:74:68:00:00;
>>> option option-129 "NIC=ne IO=0x300";
>>> }
>>>
>>>you don't have to declare the options.
>>>
>>>Matt
>>>-----Original Message-----
>>>From: lambert Bernard [mailto:[EMAIL PROTECTED]]
>>>Sent: Wednesday, January 23, 2002 2:03 PM
>>>To: LTSPmailing
>>>Subject: [Ltsp-discuss] Can't find ethercard realteak
>>>
>>>
>>>HI
>>>
>>>I want to start ltsp.
>>>
>>>serveur is suse 7.1 kernel 2.2.18 XF 4.10-85, Kde 2.2.1
>>>pci card clone realtek 8029 irq=11
>>>
>>>Station is compaq with 3c509 card
>>>
>>>use for test etherboot 5.05 for card 3c509 from floppy
>>>
>>>ltsp is 3.0
>>>
>>>when i boot the workstation i got an scren error message after running
>>>/linuxrc
>>>
>>>"could not automatically detect network card ... the nic driver to be
>>>specified in a NIC = parameter"
>>>
>>>I look at the ltsp documentation but in did'nt find how can i put in my
>>>file dhcp.conf option-129 command line
>>>
>>>I found in a recent message an exemple but dhcpd stop with an error when
>>>It read the first line
>>>"option option-129 code 129 = text;"
>>>
>>>could you tell me the syntax ?
>>>
>>>regards
>>>
>>>_____________________________________________________________________
>>>Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
>>> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
>>>For additional LTSP help, try #ltsp channel on irc.openprojects.net
>>>
>> >
>
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
