Perhaps the thing to do is use dynamic addresses initially,
and then as you add peripherials, or you need to have custom settings
for your workstations, you create a specific dhcp entry for that
workstation, meanwhile, leaving the other workstations as dynamic.
This would help reduce the initial work required to get a workstation
up and running.
Jim McQuillan
[EMAIL PROTECTED]
On 16 Feb 2002, Dario Rapisardi wrote:
> Hi,
>
> The "dynamic-bootp" thing looks nice if you don't need printers and if
> all your hardware it's similar, but what happens when you need to setup
> specific settings and/or printers for each workstation? However, I think
> Dynamic IPs are fine for demo purposes.
>
> Regards,
>
> Dario.
>
> El jue, 14-02-2002 a las 22:02, Martin Herweg escribi�:
> >
> > #Terminals with PCI-NICs
> > subnet 192.168.0.0 netmask 255.255.255.0 {
> > range dynamic-bootp 192.168.0.50 192.168.0.150;
> > }
> >
> > # Terminals with ISA-NICs:
>
>
>
> _____________________________________________________________________
> Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> For additional LTSP help, try #ltsp channel on irc.openprojects.net
>
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
