Made the change as suggested... it now goes to the correct server... BUT.... despite only specifying the "Root Path" as below, the client tries to mount /opt/ltsp/i386000. I've tried putting it in quotes and various other things, but it always appends "000" to the end! Has anyone else seen anything similar? Am pulling my hair out now - windows - argh!
>Martin, > >You need to change your 'Root Path' to: > > 192.168.0.254:/opt/ltsp/i386 > >Of course, you can substitute the proper IP address and >it should be fine. > >Jim McQuillan >[EMAIL PROTECTED] > > > >On Tue, 19 Feb 2002, Martin wrote: > >> Thanks for the tip. I've created a "Reservation" in the W2000 server's dhcp config >for the linux client & added options according to my setup: >> >> Root Path = /opt/ltsp/i386 >> Boot Server Host Name = 192.168.0.102 >> Bootfile Name = /lts/vmlinuz.ltsp >> >> The client now boots up - gets it's IP address and name fine. Unfortunately it all >stops when it gets to "Running dhclient". It attempts to mount the >> filesystem from the server that is running dhcp (the windows server!). Of course, >windows adds it's own default options to each reservation, things such >> as "WINS/NBNS Servers", but I don't see how this could be affecting things. >> >> Any ideas? >> Cheers! >> >> >I use a Windows NT box to serve DHCP information to both my LTSP >> >clients and nonLTSP clients. >> > >> >Each LTSP client must have a static entry in the DHCP server and must >> >have an associated name (or the process will fail). >> > >> >Also, you need to have the following options specified (either >> >globally or for each machine): >> > >> >Root Path -/lts/ltsroot >> >Boot Server Host Name 10.1.X.X >> >Bootfile Name - /lts/boot/bootp/vmlinuz.all.bootp >> > >> >yea yea I am still running an older version of LTSP. >> > >> >Anyway, give the above a try and if it doesn't work email me and we >> >will see if we can figure it out. >> > >> >Scott >> >-- >> >-- >> >Scott Sherrill >> >Technology Coordinator Hancock Public Schools >> >Hancock, MI >> >http://www.hancock.k12.mi.us >> > >> >_____________________________________________________________________ >> >Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: >> > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss >> >For additional LTSP help, try #ltsp channel on irc.openprojects.net >> > >> >> _____________________________________________________________________ >> Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: >> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss >> For additional LTSP help, try #ltsp channel on irc.openprojects.net >> > > >_____________________________________________________________________ >Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss >For additional LTSP help, try #ltsp channel on irc.openprojects.net _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
