Hello,

look at the dhcpd message. it cant find the /etc/dhcpd.conf. you wrote 
that you edited the /etc/dhcp.conf.
(ist vielleicht nur ein tip-fehler)

good luck,

bastian



On Sun, 2002-03-10 at 14:20, Ernst Klein wrote:
> Hello,
> 
> I`m installing a new server based on SuSE7.3 and ltsp 3.0
> 
> In the past I used SuSE 7.1 and ltsp 2.07 with bootp and it worked
> great.
> 
> I installed successful the following tgz-packages:
> 
> ltsp_core-3.0.0.tgz (with changes in the file suse-7.3.sh ,which were
> discussed here some weeks ago)
> ltsp_kernel-301-i386.tgz 
> ltsp_x_core-3.0.1.tgz
> ltsp_x_fonts.tgz
> 
> and run the ltsp_initialize -script
> 
> I made the changes in /etc/dhcp.conf as descriped in the manual (Danke
> Martin und Wolfgang f�r die deutsche �bersetzung) and then tried to
> connect from a DC and nothing happend.
> 
> Troubleshooting:
> 
> dhcpd installed?
> 
> # rpm -qa| grep dhcp
> 
> ==> dhcpcd-1.3.20pl0-13
> ==> dhcp-3.0rc12-20
> 
> dhcpd running?
> 
> netstat -an | grep ":67
> ==> no output
> 
> # ps -aux | grep dhcp
> ==> root      1563  0.0  0.3  1800  744 pts/2    S    14:02   0:00 grep
> dhcp
> 
> # ipchains -L -v
> ==> ipchains: Incompatible with this kernel
> 
> # iptables -L v
> iptables: Table does not exist (do you need to insmod?)
> linux:/home/ernst # iptables -L -v
> Chain INPUT (policy ACCEPT 1437 packets, 1015K bytes)
>  pkts bytes target     prot opt in     out     source              
> destination         
> 
> Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
>  pkts bytes target     prot opt in     out     source              
> destination         
> 
> Chain OUTPUT (policy ACCEPT 1534 packets, 180K bytes)
>  pkts bytes target     prot opt in     out     source              
> destination         
> 
> 
> Correct port in /etc/services ?
> 
> bootps           67/tcp                 # Bootstrap Protocol Server
> bootps           67/udp                 # Bootstrap Protocol Server
> 
> 
> Entries in /etc/inetd.conf
> 
> time stream tcp nowait root internal
> time dgram udp wait root internal
> telnet stream tcp nowait root /usr/sbin/tcpd in.telnetd
> login stream tcp nowait root /usr/sbin/tcpd in.rlogind
> talk dgram udp wait root /usr/sbin/tcpd in.talkd
> ntalk dgram udp wait root /usr/sbin/tcpd in.talkd
> tftp dgram udp wait root /usr/sbin/in.tftpd in.tftpd -s /tftpboot
> finger stream tcp nowait nobody /usr/sbin/tcpd in.fingerd -w
> 
> Any messages found in /var/log/messsages ?
> 
> nothing found.
> 
> I think dhcpd is not running. Starting it manually:
> 
> # dhcpd &
> 
> Internet Software Consortium DHCP Server V3.0rc12
> Copyright 1995-2001 Internet Software Consortium.
> All rights reserved.
> For info, please visit http://www.isc.org/products/DHCP
> Can't open /etc/dhcpd.conf: No such file or directory
> 
> If you did not get this software from ftp.isc.org, please
> get the latest from ftp.isc.org and install that before
> requesting help.
> 
> If you did get this software from ftp.isc.org and have not
> yet read the README, please read it before requesting help.
> If you intend to request help from the [EMAIL PROTECTED]
> mailing list, please read the section on the README about
> submitting bug reports and requests for help.
> 
> Please do not under any circumstances send requests for
> help directly to the authors of this software - please
> send them to the appropriate mailing list as described in
> the README file.
> 
> exiting.
> 
> 
> Who can help me?
> 
> regards
> 
> Ernst
> 
> _____________________________________________________________________
> Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
>       https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> For additional LTSP help,   try #ltsp channel on irc.openprojects.net



_____________________________________________________________________
Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
      https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help,   try #ltsp channel on irc.openprojects.net

Reply via email to