Ernst,
I've got LTSP 3.0 running on SuSE 7.3
Tip (1) : To start DHCP when the server boots you have to change
a parameter through Yast (1!!) :
== Start Yast
== Choose <System Administration>
== Choose <Change configuration file>
== Hit F4 to search for a specific parameter
== Type START_D and hit <Enter>
== Make sure START_DHCPD is selected
== Hit F3 to change the parameter's value
== Type "yes" without the quotes and hit <Enter>
== Leave Yast
The next time you boot your server DHCPD will be started
automagically. If you want to (re)start DHCPD manually it's
safer to use
rcdhcpd start
or rcdhcpd restart
Tip (2) : Somehow, even when you follow the installation
instructions like you did, the file dhcpd.conf doesn't get
created in (copied to) /etc like it should.
Copy /opt/ltsp/templates/dhcp_conf.tmpl to /etc/dhcpd.conf
manually and edit it to your needs.
Kind regards,
Wouter DeBacker
On Sunday 10 March 2002 14:20, you wrote:
> Hello,
>
> I`m installing a new server based on SuSE7.3 and ltsp 3.0
>
> In the past I used SuSE 7.1 and ltsp 2.07 with bootp and it
> worked great.
>
> I installed successful the following tgz-packages:
>
> ltsp_core-3.0.0.tgz (with changes in the file suse-7.3.sh
> ,which were discussed here some weeks ago)
> ltsp_kernel-301-i386.tgz
> ltsp_x_core-3.0.1.tgz
> ltsp_x_fonts.tgz
>
> and run the ltsp_initialize -script
>
> I made the changes in /etc/dhcp.conf as descriped in the
> manual (Danke Martin und Wolfgang f�r die deutsche
> �bersetzung) and then tried to connect from a DC and nothing
> happend.
>
> Troubleshooting:
>
> dhcpd installed?
>
> # rpm -qa| grep dhcp
>
> ==> dhcpcd-1.3.20pl0-13
> ==> dhcp-3.0rc12-20
>
> dhcpd running?
>
> netstat -an | grep ":67
> ==> no output
>
> # ps -aux | grep dhcp
> ==> root 1563 0.0 0.3 1800 744 pts/2 S 14:02
> 0:00 grep dhcp
>
> # ipchains -L -v
> ==> ipchains: Incompatible with this kernel
>
> # iptables -L v
> iptables: Table does not exist (do you need to insmod?)
> linux:/home/ernst # iptables -L -v
> Chain INPUT (policy ACCEPT 1437 packets, 1015K bytes)
> pkts bytes target prot opt in out source
> destination
>
> Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
> pkts bytes target prot opt in out source
> destination
>
> Chain OUTPUT (policy ACCEPT 1534 packets, 180K bytes)
> pkts bytes target prot opt in out source
> destination
>
>
> Correct port in /etc/services ?
>
> bootps 67/tcp # Bootstrap Protocol
> Server bootps 67/udp # Bootstrap
> Protocol Server
>
>
> Entries in /etc/inetd.conf
>
> time stream tcp nowait root internal
> time dgram udp wait root internal
> telnet stream tcp nowait root /usr/sbin/tcpd in.telnetd
> login stream tcp nowait root /usr/sbin/tcpd in.rlogind
> talk dgram udp wait root /usr/sbin/tcpd in.talkd
> ntalk dgram udp wait root /usr/sbin/tcpd in.talkd
> tftp dgram udp wait root /usr/sbin/in.tftpd in.tftpd -s
> /tftpboot finger stream tcp nowait nobody /usr/sbin/tcpd
> in.fingerd -w
>
> Any messages found in /var/log/messsages ?
>
> nothing found.
>
> I think dhcpd is not running. Starting it manually:
>
> # dhcpd &
>
> Internet Software Consortium DHCP Server V3.0rc12
> Copyright 1995-2001 Internet Software Consortium.
> All rights reserved.
> For info, please visit http://www.isc.org/products/DHCP
> Can't open /etc/dhcpd.conf: No such file or directory
>
> If you did not get this software from ftp.isc.org, please
> get the latest from ftp.isc.org and install that before
> requesting help.
>
> If you did get this software from ftp.isc.org and have not
> yet read the README, please read it before requesting help.
> If you intend to request help from the [EMAIL PROTECTED]
> mailing list, please read the section on the README about
> submitting bug reports and requests for help.
>
> Please do not under any circumstances send requests for
> help directly to the authors of this software - please
> send them to the appropriate mailing list as described in
> the README file.
>
> exiting.
>
>
> Who can help me?
>
> regards
>
> Ernst
>
> ______________________________________________________________
>_______ Ltsp-discuss mailing list. To un-subscribe, or change
> prefs, goto:
> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For
> additional LTSP help, try #ltsp channel on
> irc.openprojects.net
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
