Chris, I've configured lots of workstations with serial mice.
your setup look good. yet it still doesn't work. Are you certain that the port is working on the PC ? Also, you might try 'Logitech' for the protocol. Jim McQuillan [EMAIL PROTECTED] On Fri, 24 Jan 1997, Chris Pereira wrote: > I have set up K12ltsp-2.0.1 and sucessfully connected a client using a rom > image for a 3c905tx NIC and ps2 keyboard and mouse. My problem is that I > have many more old pc's with AT keyboards and serial mice connections. So > far I have been unsuccessful getting the serial mouse to work. The client > boots up to the login screen and the keyboard works but the mouse pointer > does not move. I have tried all the directions in the documentation: > > > [ws001] > XSERVER = auto > X_MOUSE_PROTOCOL = "Microsoft" > X_MOUSE_DEVICE = "/dev/ttyS0" > X_MOUSE_RESOLUTION = 400 > X_MOUSE_BUTTONS = 2 > X_MOUSE_EMULATE3BTN = Y > > in my lts.conf with different protocols with different mice as well as > /dev/ttyS1 all with the same result. I've noticed that changes to the > lts.conf take affect almost immediatly, is there some other service that > needs to stopped and restarted before changes take affect. > If I can make these old PC's work it will mean an important step in the right > direction on convincing people in this district that this is the future of > technology in education. > > Thanks in advance > Chris Pereira > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > -- _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
