Hi again,
I just finished to setup my Linux Mandrake 8.2 server, and installed LTSP.
I also make the diskette to boot on my laptop 486 with a 3c589 nic, with
the package "wireless ltsp".
------------------------------------------------------------------
On the server :
- DHCP is running, I copy the dhcp.conf.example to dhcp.conf, and I
changed the IP adress of the server
- Tftp is not started when I look on the Mandrake 8.2 control center ->
services. I ran a
service xinetd restart to make shure tftp is running, but I still have no
tools to really see if it's started.
------------------------------------------------------------------
On the terminal x :
- when I boot the nic seems to be ok, but :
"eth0 : 3Com 3c589, io 0x300, irq 3, hw_addr 00:a0:24:65:c9:8c
8k FIFO split 5:3 Rx:Tx, auto xcvr
cardmgr[36] : executing :' ./network start eth0'
cardmgr[36] : + Running dhclient
eth: flipped to 10 base T
ERROR ! No dhcpcd-eth0.info file.
This usually indicate that dhclient did not get a response frome the DHCP
server, or the NIC driver isn't workiung properly with the network card
Kernel panic: attempte to kill init !
eth0: flipped to 10 base T"
------------------------------------------------------------------
When I test my DHCP server, it's running, so I don't understand where it
comes from.
I tried my DHCP server with a windows98 host, and it works, my win98
computer get an ip adress.
Rergards,
Remi.
_______________________________________________________________
Have big pipes? SourceForge.net is looking for download mirrors. We supply
the hardware. You get the recognition. Email Us: [EMAIL PROTECTED]
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
