>
I tried here is the result of the netstat -anp | grep ":69 " :
________________________________________________
udp 0 0 0.0.0.0:69 0.0.0.0*
________________________________________________
Is it ok ?
>If you don't see any output from netstat, then
>take a look at /etc/xinetd.d/tftp and make sure
>that it doesn't say 'disable = yes'.
>
>Also, look in /var/log/messages and /var/log/secure for
>clues.
What kind of clues ?
Regards,
Remi.
__________________________________________________________________________
>On Sun, 12 May 2002, Remi BERNHARD wrote:
>
> > At 16:44 12/05/02 -0400, you wrote:
> > >Remi,
> > >
> > >Are you sure that tftpd is installed ?
> > >
> > >It doesn't install by default on Mandrake.
> >
> > I know that mandrake doesn't install it by default, and of course I
> > installed it.
> >
> >
> > >Then, when you think you've got it installed and running,
> > >do this to see:
> > >
> > > netstat -anp | grep ":69 "
> > >
> > >That should produce a line showing that it is listening on
> > >port 69.
> > >
> > >If you don't see that, then it still isn't configured
> > >correctly.
> >
> > I'm going to test this.
> > If this doesnt appear, what else could I do ?
> > I've read the whole ltsp documentation (especially the troubleshooting
> > section), nothing have helped me.
> >
> > Regards,
> > Remi.
> >
> >
> > >On Sun, 12 May 2002, Remi BERNHARD wrote:
> > >
> > > > Hi again,
> > > >
> > > > I just finished to setup my Linux Mandrake 8.2 server, and
> installed LTSP.
> > > > I also make the diskette to boot on my laptop 486 with a 3c589 nic,
> with
> > > > the package "wireless ltsp".
> > > >
> > > > ------------------------------------------------------------------
> > > > On the server :
> > > > - DHCP is running, I copy the dhcp.conf.example to dhcp.conf,
> and I
> > > > changed the IP adress of the server
> > > > - Tftp is not started when I look on the Mandrake 8.2 control
> > > center ->
> > > > services. I ran a
> > > > service xinetd restart to make shure tftp is running, but I still
> have no
> > > > tools to really see if it's started.
> > > > ------------------------------------------------------------------
> > > >
> > > > On the terminal x :
> > > > - when I boot the nic seems to be ok, but :
> > > > "eth0 : 3Com 3c589, io 0x300, irq 3, hw_addr 00:a0:24:65:c9:8c
> > > > 8k FIFO split 5:3 Rx:Tx, auto xcvr
> > > > cardmgr[36] : executing :' ./network start eth0'
> > > > cardmgr[36] : + Running dhclient
> > > > eth: flipped to 10 base T
> > > >
> > > > ERROR ! No dhcpcd-eth0.info file.
> > > > This usually indicate that dhclient did not get a response frome
> > > the DHCP
> > > > server, or the NIC driver isn't workiung properly with the network card
> > > >
> > > > Kernel panic: attempte to kill init !
> > > > eth0: flipped to 10 base T"
> > > > ------------------------------------------------------------------
> > > >
> > > > When I test my DHCP server, it's running, so I don't understand
> where it
> > > > comes from.
> > > > I tried my DHCP server with a windows98 host, and it works, my win98
> > > > computer get an ip adress.
> > > >
> > > > Rergards,
> > > > Remi.
> > > >
> > > >
> > > > _______________________________________________________________
> > > >
> > > > Have big pipes? SourceForge.net is looking for download mirrors. We
> supply
> > > > the hardware. You get the recognition. Email Us:
> [EMAIL PROTECTED]
> > > > _____________________________________________________________________
> > > > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
> > > > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> > > > For additional LTSP help, try #ltsp channel on irc.openprojects.net
> > > >
> > >
> > >--
> >
> >
> > _______________________________________________________________
> >
> > Have big pipes? SourceForge.net is looking for download mirrors. We supply
> > the hardware. You get the recognition. Email Us: [EMAIL PROTECTED]
> > _____________________________________________________________________
> > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
> > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> > For additional LTSP help, try #ltsp channel on irc.openprojects.net
> >
>
>--
>
>
>_______________________________________________________________
>
>Have big pipes? SourceForge.net is looking for download mirrors. We supply
>the hardware. You get the recognition. Email Us: [EMAIL PROTECTED]
>_____________________________________________________________________
>Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
>For additional LTSP help, try #ltsp channel on irc.openprojects.net
_______________________________________________________________
Have big pipes? SourceForge.net is looking for download mirrors. We supply
the hardware. You get the recognition. Email Us: [EMAIL PROTECTED]
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
