On Thu, 16 May 2002 16:56:51 -0500 (COT), "Roger Moreno Quintero"
<[EMAIL PROTECTED]> wrote:
> we have a big problem with a 486 workstation,
>
> ---------------------------------------------------
> vfs: cannot open root device "ram0" or 01:00
> please append a correct "root=" boot option
> kernel panic VFS: unable to mount root fs on 01:00
>
> ----------------------------------------------------
>
> other terminals work fine, somebody knows the solution
>
>
> other problem, how i configure a isa 3com (3c5x9), the option-128 dont work
>
> please helpme
I have that, too. Using the older kernel will help...as long as your network card
isn't too old (in my case, just a little over a year!).
If you're set up the same way that I am, you'll get to another roadblock about
needing to pass parameters with the "option-129" line. It didn't work for me...but
I'll have to scavenge a floppy drive someplace to get around it. :(
Good Luck!
------------------------------------------------------------------------
Brian Fahrl�nder Linux Zealot, Conservative, and Technomad
Evansville, IN My Voyage: http://www.CounterMoon.com
ICQ 5119262
AOL: WheelDweller
Yahoo: WheelDweller Me: http://www.kamakiriad.com/aboutme.html
------------------------------------------------------------------------
_______________________________________________________________
Have big pipes? SourceForge.net is looking for download mirrors. We supply
the hardware. You get the recognition. Email Us: [EMAIL PROTECTED]
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
