Bob, I've seen this when the modeline isn't specified properly.
Can you show me what you have set for X_MODE_0 ? Jim McQuillan [EMAIL PROTECTED] On 30 May 2002, Bob Wooden wrote: > I have one workstation running LTSP on RedHat 7.3. The ws is an old > Parkard-Bell pentium 120, 48 Mb RAM and no local apps. The video in the > motherboard was only 512Kb and would only let me run at 800 x 600. I > found a 2Mb S3 Virge/DX PCI video card. Installed card, motherboard > recognized it okay, but XF86_SVGA driver refused and stopped at "Fatal > server error: Dotclock Experted" . > > Changed to XF86_S3V driver, same thing. Went back to original > motherboard video of 512 Kb (with XF86-SVGA driver) and that now refuses > to work. I am still getting the "Dotclock expected" crash notice. I > have tried all suggestions in the LTSP manual and they all test okay. > (Well, except for the ipchains, but it said that same "not compatible > with this kernel" before and worked fine then.) > > Help me please! I will be glad to send whatever info is needed! > > > > > > _______________________________________________________________ > > Don't miss the 2002 Sprint PCS Application Developer's Conference > August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > -- _______________________________________________________________ Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
