On Wed, 2002-07-03 at 00:23, Maria Backlund wrote:
> We've made a small network consisting of a linux terminal server and
> several clients. We're using Red Hat 7.2. Now we would like to implement
> VPN by using FreeS/Wan. Do we need to recompile the LTSP-kernel to
> adjust it to FreeS/Wan or is there an easier way? If someone has done a
> similar project we would appreciate your support.
>
FreeS/Wan has not really got anything to do with LTSP. What you probably
want is:
LTSP workstation ->[hub]<- LTSP server
^
|
Gateway running FreeS/Wan --> Internet
The LTSP workstations & server are on 192.168.1.x.
The Gateway has address 192.168.1.250 and a 'real' IP address to the
Net. The LTSP server has GATEWAY=192.168.1.250.
The only thing you need to be aware of is you have masquerading/NAT
setup, and you're tunnelling between, say, 192.168.1.x and 192.168.2.x,
you need to make sure the packets destined for that net aren't maq'd
(assuming the masqing is being done on the same server that FreeS/Wan is
running on.
I can send you my config files if you like.
Bryan
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
