As a company, we setup and maintain Linux FreeS/WAN VPN solutions. I don't see a need for setting up VPN tunnels on the LTSP application server, unless you are wanting to secure and encrypt all traffic being sent to and from the LTSP workstations. We have had a fairly thorough discussion on this list concerning some of the details about how to go about setting the workstations up for this kind of scenario.
If on the other hand, you want to allow VPN connections to your internal network from the outside, i.e., the Internet, then you will most likely want to setup FreeS/WAN on your firewall that is connected directly to the Internet or to a dedicated security gateway box in a DMZ or the internal network that all IKE, AH, and ESP traffic are redirected to by the firewall. Maria Backlund wrote: >We've made a small network consisting of a linux terminal server and >several clients. We're using Red Hat 7.2. Now we would like to implement >VPN by using FreeS/Wan. Do we need to recompile the LTSP-kernel to >adjust it to FreeS/Wan or is there an easier way? If someone has done a >similar project we would appreciate your support. > > >------------------------------------------------------- >This sf.net email is sponsored by:ThinkGeek >Welcome to geek heaven. >http://thinkgeek.com/sf >_____________________________________________________________________ >Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss >For additional LTSP help, try #ltsp channel on irc.openprojects.net > >-- >This message has been scanned for viruses and >dangerous content by MailScanner, and is >believed to be clean. > > -- Jason A. Pattie [EMAIL PROTECTED] -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
