Allen
This works on my EPIA5000 with LTSP V3
[Default]
XSERVER = auto
X_MOUSE_PROTOCOL = "PS/2"
X_MOUSE_DEVICE = "/dev/psaux"
X_MOUSE_RESOLUTION = 400
X_MOUSE_BUTTONS = 3
USE_XFS = N
NFS_SWAPDIR = /opt/ltsp
USE_XFS = Y
PRINTER_0_DEVICE = /dev/lp0
PRINTER_0_TYPE = P # P-Parallel, S-Serial
PRINTER_0_PORT = 9100 # tcp/ip port:
LOCAL_APPS = Y
X_BLANKTIME = 30
X_SUSPENDTIME = 30
SYSLOG_HOST = 192.168.9.2
[epia5000]
X_MODE_0 = 800x600
LOCAL_APPS = Y
X_COLOR_DEPTH = 16
MODULE_05 = sound
MODULE_06 = via82cxxx_audio
X_DEVICE_OPTION_01 = SWCursor
You need the SWCursor as the display will, on occasions, slip so that the cursor
pointer is not over the hotspot by about 10mm. Very disconcerting for the user.
Darryl
Allen C wrote:
> I have a brand new EPIA 5000 which I've got to boot
> over the LAN thanks to James Linders PXE How-to.
>
> The problem is that the display doesn't work in graphics
> mode. My Sony Multiscan monitor reports that the freq
> is out of range. XF86 correctly reports that it is
> dealing with a Trident etc. but that the display is a
> TFT 800x600. It works fine in run level 3.
>
> I am using the latest LTSP dist.
>
> TIA
>
> Allen C.
>
>
>
>
-------------------------------------------------------
This sf.net email is sponsored by: Dice - The leading online job board
for high-tech professionals. Search and apply for tech jobs today!
http://seeker.dice.com/seeker.epl?rel_code=31
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
