Thanks to those who responded to my plea. It is all now
working with sound and a printer. here is my current lts.conf
I haven't tried setting the XSERVER to auto, but that works too
apparently. XF86_SVGA doesn't.
The sound volumes are way too high causing distortion
[xterm2]
XSERVER = trident
RUNLEVEL = 3
XkbLayout = "gb"
X_MOUSE_PROTOCOL = "PS/2"
X_MOUSE_DEVICE = "/dev/psaux"
X_MOUSE_RESOLUTION = 400
X_MOUSE_BUTTONS = 3
#
PRINTER_0_DEVICE = /dev/lp0
PRINTER_0_TYPE = P # P-Parallel, S-Serial
PRINTER_0_PORT = 9100 # tcp/ip port:
#
SOUND = Y
SOUND_DAEMON = nasd
VOLUME = 100 # Speaker & WAVE volume pecentage
MIC_VOLUME = 100 # Microphone volume
CD_VOLUME = 75 # CD Audio volume
SMODULE_01 = auto
-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old
cell phone? Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
