I agree, The video card is all important. I have a group of 486/66 with 
some 33's thrown in. The 66's with a low grade video card run approximatly 
the same as the 33's with the same vid. However if I put a better (still
ISA)
video card in (#9gxe 2Meg VRAM), the performance improves drastically. I
can't
imagine what a decent pentium with a PCI video card would be able to do. 

Doug Breshears

-----Original Message-----
From: Derek Zoolander [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 07, 2002 3:55 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re: [Ltsp-discuss] 486 (33mhz!) with 16 of ram good enough?


On Thu, 2002-08-08 at 04:35, [EMAIL PROTECTED] wrote:
> Hi all,
> the subject already says it all :).
> Anybody who can save me some time through telling me if a 486 (isa
graphics, 
> isa 10mbps nic) with 16 and 33mhz is fast enough as node.
> 486 - no prob
> 16mb - definitely works
> but 33 MHZ - that really seems damn little - anybody any experience with
this 
> kind of machine?
> 
> thnx in advance,
> 
> Tom(my)___

If you have a PCI  slot you will find that using a PCI Video card will
make a BIG difference.

Its all in the Video card




-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_____________________________________________________________________
Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
      https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help,   try #ltsp channel on irc.openprojects.net


-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old
cell phone?  Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
_____________________________________________________________________
Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
      https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help,   try #ltsp channel on irc.openprojects.net

Reply via email to