I have workstations with NE2000 ISA cards purchased from
disklessworkstations.com in 1999. I have been using these cards successfully
with ltsp until I upgraded to ltsp-3.0.4. I read that because the new kernel
can't scan ISA cards, I need to place two lines in my dhcpd.conf file. I did
that and restarted dhcpd, got no error messages from dhcpd, but got a kernel
panic when I booted the workstation. There was an error message saying that
it couldn't scan the NIC and suggested that I add a line to my dhcpd.conf
file (which I already did).
So maybe, I put the lines in the the wrong place. Here is my dhcpd.conf file.
-----------------------------------------------------
# Sample configuration file for ISCD dhcpd
#
# Don't forget to set run_dhcpd=1 in /etc/init.d/dhcpd
# once you adjusted this file and copied it to /etc/dhcpd.conf.
#
default-lease-time 21600;
max-lease-time 21600;
option subnet-mask 255.255.255.0;
option broadcast-address 192.168.1.255;
option routers 192.168.1.1;
option domain-name-servers 192.168.1.1;
option domain-name "xxxxx.xxx";
option root-path "/tftpboot/lts/ltsroot";
shared-network WORKSTATIONS {
subnet 192.168.1.0 netmask 255.255.255.0 {
}
}
group {
use-host-decl-names on;
option log-servers 192.168.1.1;
host ws102 {
hardware ethernet aa:bb:cc:dd:ee:ff;
option option-128 aa:bb:cc:dd:ee:ff;
option option-129 "NIC=ne IO=0x0300";
fixed-address 192.168.1.2;
filename "/lts/vmlinuz-2.4.18-ltsp-1";
}
}
---------------------------------------------------
I changed my MAC addr in this listing, but I checked the MAC addr, and the
addr in the 'hardware ethernet' line is the same as the addr in the 'option
option-128' line. The rest of the file is the same that worked with ltsp-2
with the exception of the 'filename' line.
Could someone please tell me if I am doing these option lines correctly, or is
there some other problem?
Thanks for any help.
Gary
[EMAIL PROTECTED]
-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old
cell phone? Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
