[Ltsp-discuss] really irritated

Ok, with all I have written for computers I thought I was good.

I pulled the software for LTS and various other parts and now

all is working well. I the components for the first new, real node

of what I'm doing. I bought cpu, cpu fan, motherboard, ram,

and power supply. I bench tested the power supply and the

cpu fan. They both work. Then I connect it all togehter, flip the

switch on the power supply, and nothing happens. I looked at

the small diagram that came with the motherboard and notice

there is a header for a power switch and a reset switch. Not

having a power switch (where can I get one or how do I make one)

I put a jumper across the header pins to see if it will power on.

I know this isn't the right way and I need a real switch (where

do I get one of these again?), but I wanted to see if the mother

board will power up. Still nothing happens.

So, how do I power on this setup?

amd 1.3

biostar m7vkq

120mb sdram

big cpu fan

250w power supply

Mike

Reply via email to