[EMAIL PROTECTED] wrote:
>Ronald,
>
>You probably need to set 'DISABLED_ACCESS_CONTROL = Y'
>in the lts.conf file.
>
I tried this, but it is the same. Below is my entire lts.conf file,
maybe I have something else wrong:
[Default]
LTSP_BASEDIR = "/tftpboot/ltsp"
SERVER = 192.168.251.254
XSERVER = auto
X_MOUSE_PROTOCOL = "PS/2"
X_MOUSE_DEVICE = "/dev/psaux"
X_MOUSE_RESOLUTION = 400
X_MOUSE_BUTTONS = 3
USE_XFS = N
LOCAL_APPS = N
RUNLEVEL = 5
[ron-TC]
XSERVER = XF86_5530
LOCAL_APPS = Y
LOCAL_WM = Y
DISABLED_ACCESS_CONTROL = Y
USE_NFS_SWAP = Y
NFS_SWAPDIR = /tftpboot/ltsp
SWAPFILE_SIZE = 128m
RUNLEVEL = 5
X_MODE_0 = "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
X_MODE_1 = "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync
X_MODE_2 = "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync
SOUND = Y
SOUND_DAEMON = nasd # This can be 'nasd', or 'esd' at this time
VOLUME = 100 # Speaker & WAVE volume pecentage
MIC_VOLUME = 100 # Microphone volume
CD_VOLUME = 75 # CD Audio volume
SMODULE_01 = cx5530
NIS_DOMAIN = ThinClients
NIS_SERVER = 192.168.251.254
PRINTER_0_DEVICE = /dev/lp0
PRINTER_0_TYPE = P
Following things I could not get to work:
1. local application, like with these two shell scripts:
HOST=`echo $DISPLAY | awk -F: '{ print $1 }'`
rsh ${HOST} MOZILLA_HOME=/usr/local/netscape \
/usr/local/netscape/netscape -display ${DISPLAY}
HOST=`echo $DISPLAY | awk -F: '{ print $1 }'`
rsh ${HOST} /usr/local/bin/rdesktop ts2 -display ${DISPLAY}
2. Sound is not working, but in runlevel 3 I can auplay test.wav (with the above
lts.conf - ONCE) - however it hangs after a half second.
I tried before:
SOUND = Y
SOUND_DAEMON = nasd # This can be 'nasd', or 'esd' at this time
VOLUME = 100 # Speaker & WAVE volume pecentage
MIC_VOLUME = 100 # Microphone volume
CD_VOLUME = 75 # CD Audio volume
SMODULE_01 = soundcore
SMODULE_02 = uart401
SMODULE_03 = sb io=0x220 irq=5 dma=1
(It recogizes the sound card even with SMODULE_01=auto)
I see the loading sound card, loding uart401 and loading Soundblaster
module, but than I get only:
Too much work in interupt on uart401 (Ox330). UART jabbering ??
Too much work in interupt on uart401 (Ox330). UART jabbering ??
Too much work in interupt on uart401 (Ox330). UART jabbering ??
--- What does it mean?
bye
Ronald
--
Ronald Wiplinger, Technical Director
Bright Networking Inc, http://www.2bright.net
7F, 192-1, Sec. 3, Tatung Rd., Shijr City, Taipei, Taiwan, RoC
Tel.: +886 2 8647-1685, Mobile +886 915 653-452, Fax: +886 2 8647-2002
-------------------------------------------------------
This sf.net email is sponsored by: viaVerio will pay you up to
$1,000 for every account that you consolidate with us.
http://ad.doubleclick.net/clk;4749864;7604308;v?
http://www.viaverio.com/consolidator/osdn.cfm
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
