Tried that now. After I run start_ws I get the grey screen and the hourglass and nothing more happens. I don't get the black screen anymore. More tips? Should I give up with the integrated chip? The problem is that this old machine doesn't have any PCI slots (only ISA) so I guess it isn't easy to first find a ISA graphics card and then get this to work...
//kim > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:jam@;McQuil.com] > Sent: Saturday, November 09, 2002 3:51 PM > To: Kim Leandersson > Cc: [EMAIL PROTECTED] > Subject: RE: [Ltsp-discuss] More help needed > > > On Sat, 9 Nov 2002, Kim Leandersson wrote: > > > Thanks for the advices so far. I have now edited the > lts.conf and the > > XF86Config and I think I'm on the road again. I don't get an error > > message anymore, I get a grey screen with an hourglass. > This screen is > > shown for about ten seconds, then it's a black screen for > 10 seconds, > > then back to grey with hourglass and so on. Don't really > now what the > > problem is. It seems to be the ugly grey screen that you get if GDM > > isn't started (it is) but here I get an hourglass instead > of a cursor. > > Anyone who can guide me? > > > > Try setting RUNLEVEL = 3 in the lts.conf file. > Then, boot the client and type: sh /tmp/start_ws > > Then, when it dies after 10 seconds, it should leave the > error message on the screen, so you can see what is wrong. > > Jim McQuillan > [EMAIL PROTECTED] > > ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
