Our school district is new to LTSP and is having a few problems getting started. First of all, we are using a server with the following: P4 1.7 GHz with one gig of ram, etc, etc. The terminals are 233 MHz with 32meg ram. Using K12LTSP 2.1.0. OK, to the problem, when trying to boot from a floppy on the terminal, the system locals the server and attempts to startup process but before (I think, I have never actually seen the entire boot process) it get to the X screen, the monitor goes blank and the keyboard becomes inaccessible. The system goes through about two screens of rapid commands and halts briefly with a warning about the sound card being misconfigured before the monitor goes blank. When the monitor goes blank, the green led light on the monitor goes from green to orange. I have tried the boot up on several computers to find the same result, even removed all PCI cards except the network and video. I even tried it on a new system. Is there a step I am leaving out or a setting that needs correcting? Any help or advice would be greatly appreciated.
Jerome Edwards LISD The information contained in this message is confidential and is intended for the addressees only. If you have received this message in error or there are any problems, please notify the sender immediately. The unauthorized use, disclosure, copying or alteration of this message is strictly forbidden. ------------------------------------------------------- This SF.net email is sponsored by: Get the new Palm Tungsten T handheld. Power & Color in a compact size! http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0002en _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
