Kurt,
You have installed ltsp_core and ltsp_kernel, but you didn't
say that you have installed ltsp_x_core, which you will need.
Also, the 'rpm -q' command should work, but you didn't
use the correct package name. You DO NOT need the '.rpm' on
the end of it.
You should try something like this:
rpm -qa | grep ltsp
That will list all of the ltsp packages that are installed.
Also, you should probably install the ltsp_x_fonts package, unless you
know how to configure xfs on your server.
Take a look at http://www/LTSP.org/instructions-3.0.html for some
more help on getting the correct packages installed.
Jim McQuillan
[EMAIL PROTECTED]
On Tue, 3 Dec 2002, Kurt Wolter wrote:
> Hello,
>
> I believe I have correctly installed the latest ltsp_core and
> ltsp_kernel packages on my Mandrake 8.2 server. I used the rpm versions
> however rpm -q ltsp_core-3.0.0-0.i386.rpm returns a message stating that
> package is not installed. Same for the kernel. I have tried to rpm
> --initdb and rpm --rebuilddb but still get the same behavior.
>
> The files from the two packages appeared to be installed. I have worked
> my way to the point where my client will begin to boot. I am using a
> relatively slow processor on the client, so I am able to watch the boot
> messages. The client gets an address okay, it mounts my exported ltsp
> directory okay There are no errors, warnings, or otherwise ominous
> texts. Then the client hangs with the message
>
> Starting syslogd
>
> When I examine /var/log/messages on my server (not in /opt/ltsp) I
> have...
>
> Dec 3 15:49:18 techno2 rpc.mountd: authenticated mount request from
> 172.20.0.11:688 for /opt/ltsp/i386 (/opt/ltsp/i386)
> Dec 3 15:49:23 172.20.0.11 syslogd started: BusyBox v0.60.1
> (2001.09.28-01:12+0000)
> Dec 3 15:49:23 172.20.0.11 devfsd[108]: Caught SIGHUP
> Dec 3 15:49:23 172.20.0.11 devfsd[108]: read config file:
> "/etc/devfsd.conf"
> Dec 3 15:49:23 172.20.0.11 init: Entering runlevel: 2
> Dec 3 15:49:23 172.20.0.11 init: Switching to runlevel: 5
> Dec 3 15:49:23 172.20.0.11 init: cannot execute "/tmp/start_ws"
> Dec 3 15:49:39 172.20.0.11 last message repeated 9 times
> Dec 3 15:49:44 172.20.0.11 init: Id "9" respawning too fast: disabled
> for 5 minutes
> Dec 3 15:54:45 172.20.0.11 init: cannot execute "/tmp/start_ws"
> Dec 3 15:55:20 172.20.0.11 last message repeated 8 times
> Dec 3 15:55:25 172.20.0.11 init: cannot execute "/tmp/start_ws"
> Dec 3 15:55:30 172.20.0.11 init: Id "9" respawning too fast: disabled
> for 5 minutes
>
> locate start_ws and find start_ws on my server yield no results. I have
> been unable to to a search in the mailing list archives, so I'm writing
> to the mailing list.
>
> Thanks in advance if you can help.
>
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: Microsoft Visual Studio.NET
> comprehensive development tool, built to increase your
> productivity. Try a free online hosted session at:
> http://ads.sourceforge.net/cgi-bin/redirect.pl?micr0003en
> _____________________________________________________________________
> Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> For additional LTSP help, try #ltsp channel on irc.openprojects.net
>
--
-------------------------------------------------------
This SF.net email is sponsored by: Microsoft Visual Studio.NET
comprehensive development tool, built to increase your
productivity. Try a free online hosted session at:
http://ads.sourceforge.net/cgi-bin/redirect.pl?micr0003en
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
