Hi Achim, Thanks for your advice. It works now
At 05:35 PM 12/3/2002 +0100, Achim Kalwa wrote:
- snip -Custom Modelines for lts.conf file:
You will have to change the X11 modelines for the workstations connected to those old monitors:
http://www.ltsp.org/contrib/modelines.html
/opt/ltsp/i386/etc/lts.conf
I added following 3 lines in [default]
X_MODE_0 = 640x480 31.5 640 664 704 832 480 489 492 520 +hsync +vsync
X_MODE_1 = 800x600 40 800 840 968 1056 600 601 605 628 +hsync +vsync
X_MODE_2 = 1024x768 44.9 1024 1048 1208 1264 768 776 784 817 interlace
then it works. However it could not toggle with <CTL><ALT><+> to change resolution.
But if I added them to
[ws001]
XSERVER = ... whatever ...
...
X_MODE_0 = 640x480 31.5 ...
X_MODE_1 = 800x600 40 ...
X_MODE_2 = 1024x768 44.9 ...
then it did not work. I don't understand its cost.
This is only an experiment, one diskless workstation connected the LTSP server with a crossover cable.
Any advice.
Thanks in advance.
Stephen Liu
-------------------------------------------------------
This SF.net email is sponsored by: Microsoft Visual Studio.NET comprehensive development tool, built to increase your productivity. Try a free online hosted session at:
http://ads.sourceforge.net/cgi-bin/redirect.pl?micr0003en
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
