Jim McBride wrote:
> Environment: > > Running Redhat 8.2 > Downloaded latest version of ltsp from ltsp.org site. > Install (manual) went smoothly. > Modified lts.conf, hosts and other files fine (used old examples that > previously worked for me so I am fairly sure that I have the IP > addresses etc. set up correctly). > > Went to troubleshooting section of ltsp manual from ltsp.org. Manual > date 3/2/02 Rev 3.0 Page 20 section 6.2.2 and tried the various > suggestons there without success. Indications are that I do not have > dhcpd running so I finally tried > service dhcpd start > but I get the following: > dhcpd: unrecognized error. > > How do I start dhcpd in Redhat and how do I arrange it so that it will > start automatically every time?? > > Wordstation symptoms: Searching for server (dhcp) �. And then hangs. The workstation is searching for the dhcp server, but none are replying. When I configured RedHat 8.0, though I specified I wanted dhcpd loaded, it did not load the software. I needed to mount the installation CD, copy the dhcpd*.rpm to a temporary directory and install. Once installed, dhcpd was then a recognized command. Ken Cobler ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
