Taking the next logical step, I replaced the parallel cable....seems the one I was using was bad. It's the little things that kill. Now on to remote printing!
On Tue, 2002-12-10 at 13:56, The Undercracker wrote: > John, thanks for suggestions. > > The lp_server process is indeed running. Trying to manually echo data to > /dev/lp0 causes no effect. I double checked this with all my printers on > the server, and they blink on command. So for some reason, data isn't > getting down the parallel port. I checked the terminal bios, but the > port is active, so I don't know what might be the problem. Is the > parallel module not being loaded perhaps? > > All suggestions are welcome. > > -Jason ------------------------------------------------------- This sf.net email is sponsored by: With Great Power, Comes Great Responsibility Learn to use your power at OSDN's High Performance Computing Channel http://hpc.devchannel.org/ _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
