Re: [Ltsp-discuss] Unable to locate module after kernel compilation

[Chambard O]

On Fri, 13 Dec 2002 15:26:29 -0100
Chambard O <[EMAIL PROTECTED]> wrote:

> Hello,
> All is OK with standard kernel 2.4.9-ltsp-5
> I just have compiled a new kernel for the diskless workstation
> This new kernel is loading as usual until modprobe has to locate the
> driver for the NIC. and it does not manage to ! Actually the module
> is present in the same place as previous.
> Do I have something to do with the new kernel and the location for
> modules ? Any help would be appreciated

Chambard,
You need to copy your modules to
/opt/ltsp/i386/lib/modules/<your_kernelmod_dir>

Cheers,
-rob

Thanks for your help
My kernel is /tftpboot/vmlinuz-2.4.7-ltsp-eicas
I have copied recursively /opt/ltsp/i386/lib/modules/2.4.9-ltsp-5 into 2.4.7-ltsp-eicas
No improvement
The kernel sources I used: /usr/src/linux-2.4.7-10
I try again with /tftpboot/vmlinuz-2.4.7-10-ltsp-eicas and /opt/ltsp/i386/lib/modules/2.4.7-10-ltsp-eicas
No improvement

modprobe: Can't locate module ne2k-pci

May be problem with denomination of "<your_kernelmod_dir>" ?

-olivier




-------------------------------------------------------
This sf.net email is sponsored by:
With Great Power, Comes Great Responsibility Learn to use your power at OSDN's High Performance Computing Channel
http://hpc.devchannel.org/
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net