On Fri, 10 Jan 2003, Werner Winter said: > Hello, > my ltsp-server is working well with pentium100-terminals. But when I > try to boot a 486 with a TSENG- LAB-ET-4000 graphics device (1MB) the > terminal reboots after dhcp-request (I looked in /var/log/messages). I > think lts.conf is ok. Could it be the wrong xserver, is it the > graphics device or what else could be wrong?
Just about anything. My approach would be to temporarily set up the machine with an hd and load linux on it (or possibly using a CD bootable distro like Knoppix might be sufficient to diagnose the problem). After working out the problem, then carry that cfg over to the LTS. ---------------------------------------------------------------- John Karns [EMAIL PROTECTED] ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
