Hello,
>> my ltsp-server is working well with pentium100-terminals. But when I
>> try to boot a 486 with a TSENG- LAB-ET-4000 graphics device (1MB) the
>> terminal reboots after dhcp-request (I looked in /var/log/messages). I
>> think lts.conf is ok. Could it be the wrong xserver, is it the
>> graphics device or what else could be wrong?
>
>Just about anything.
>
>My approach would be to temporarily set up the machine with an hd and load
>linux on it (or possibly using a CD bootable distro like Knoppix might be
>sufficient to diagnose the problem). After working out the problem, then
>carry that cfg over to the LTS.
I got a solution for my problem. It's unbelievable! I always booted the terminal from
a hd in dos-
mode but there was still windows on it. I deleted the windows-directory, booted again
and the
terminal everything was fine :-)) Nearly fine; I can boot to the console but not in
graphic mode. On
the screen I can see the big grey X but then nothing more happens.
the terminal part of my lts.conf
[ws004]
XSERVER = XF86_SVGA
X_HORZSYNC = 31-75
X_VERTREFRESH = 55-90
X_MOUSE_PROTOCOL = "Microsoft"
X_MOUSE_DEVICE = "/dev/ttyS0"
X_COLOR_DEPTH = 8
X_MOUSE_EMULATE3BTN = Y
X_MODE_0 = 800x600
X_MODE_1 = 640x480
XkbModel = pc104
XkbLayout = de
X4_MODULE_0 = type1
X4_MODULE_1 = speedo
X4_MODULE_2 = freetype
USE_XFS = N
SWAPFILE_SIZE = 8m
LOCAL_APPS = N
RUNLEVEL = 5
Werner
-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
