I have successfully deployed a few LTS epos systems using Redhat 7.2 with touchscreens. I wish to replace office PCs with diskless terminals, but for other reasons I wish to use Redhat 8. I have obtained the latest core/kernel/x_core rpms for LTS3 and gone through the load procedure with which I am now familiar. However having tried some of the diskless machines which work quite happily with RH7.2 I have had limited/very little success with RH8. It's obviously in the X arena as lower run levels seem OK. The notion of using some older machines is important... so does anyone know what the problem is and, more importantly, what to do about it. It throws up messages about:- No devices detected, Fatal server error:, no screens found Any help welcome. Tom --
Tom Knowles IT Manager - Peters Cathedral Bakers Knowles House, Damson Way, Dragonville Ind Est, Durham, DH1 2HE ------------------------------------------------------- ------------------------------------------------------- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
