Am Mittwoch, 22. Januar 2003 12:05 schrieb Tony van der Hoff:
> Does anyone have experience of mixing PXE with Etherboot? What do I need
> to change?
You have at least two options:
- Follow the steps of the PXE howto on www.ltsp.org and use PXE directly
- Load Etherboot via PXE and then continue as if you used Etherboot from the
beginning. This is what I do and here is an excerpt from dhcpd.conf (dhcpd
version 3):
host pxe001 {
hardware ethernet 00:00:aa:bb:cc:dd;
fixed-address pxe001;
if substring (option vendor-class-identifier, 0, 9) = "PXEClient"
{
filename "/tftpboot/lts/eb-5.0.8-eepro100.lzpxe";
}
else if substring (option vendor-class-identifier, 0, 9) = "Etherboot"
{
filename "/tftpboot/lts/vmlinuz-2.4.19-ltsp-1";
# This option is needed since our eepro100 variant is not recognized by LTSP
option option-129 "NIC=eepro100";
}
The only thing you need aside from these lines is the PXE loadable etherboot
image from rom-o-matic.net. The rest is the same as if you where booting
via etherboot only.
Georg
-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
