I'm trying to set up a printer on a workstation but no prints are coming through
and I don't know where to start looking for error logs
I have these lines in the [Default] section of lts.conf (shouldn't be a problem if
the ports don't exist should it?)
PRINTER_0_DEVICE = /dev/lp0
PRINTER_0_TYPE = P
PRINTER_1_DEVICE = /dev/lp1
PRINTER_1_TYPE = P
PRINTER_2_DEVICE = /dev/lp2
PRINTER_2_TYPE = P
I am using cups and have a Canon LBP460 setup using a Laserjet III driver to device
URI socket://192.168.0.23:9100/
Sending a test page from the CUPS web interface I get:
Printer State: processing, accepting jobs.
"Connected to host, sending print job..."
Device URI: socket://192.168.0.23:9100/
but it never finishes
I need to figure out where the problem lies (cups, printer, or ltsp) - any advice?
-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
