torsdag 13. februar 2003 20:45, skrev Dylan Maniquis: > Well, thanks a lot for all the help. I finally got the Rawrite program to > work to make a bootable floppy. However, now the terminal boots from the > NIC and appears that DHCP is working, because it gives an IP address, but > then it loads a series of dots as if it is connecting and reboots again > immediately. This continues over and over until I manually shut down the > terminal. Any ideas? I'm certainly out of them. Thanks.
This happened to me too yesterday. My daughter just got a new computer (Windows), and I tried to make a boot floppy for it (found out that it had some kind of Intel card, but couldn't figure exactly which image to download from rom-o-matic, so I downloaded all five canditates and tried them one by one. I couldn't make any one of them work, and I made the conclusion that since this was a built in card with PXE support it will not work with etherboot? I am not sure how correct this is, as I havn't had time to work more on this problem. -- Hallvard P ------------------------------------------------------- This SF.NET email is sponsored by: FREE SSL Guide from Thawte are you planning your Web Server Security? Click here to get a FREE Thawte SSL guide and find the answers to all your SSL security issues. http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0026en _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
