I am having a Xfree86 "Bootup" slowness problem on an Netier SL1000 ThinClient running K12 LTSP version 3.1.0.
The server has ltsp_x_core-3.0.4-2.k12ltsp.4.3.0 (Which by looking at the numbers I can assume is based on the 3.0.4 ltsp_x_core) I was about to post the message at XFree86.org but I noticed that the package is based on the pre-release of 4.3 (specifically 4.2.99.1) I am sure if I post the message people will tell me to upgrade before they could help me.... Can anybody tell me if there are plans to use the 4.3 release of the XFree ? If So when ? I am not sure the problem will go away with the 4.3 release but I seriously doubt I can post the message on their site without getting slapped ... Onto the Problem ... The machine boots up the Linux Portion without a problem, When it gets to a certain probe on the Video card it sits there about 4.5 - 5.0 minutes .Once it times out everything flies from there and X finishes booting. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Reloading /usr/X11R6/lib/modules/libddc.a Thu Jun 5 17:35:58 CDT 2003 (II) S3VIRGE(0): VESA VBE DDC supported (II) S3VIRGE(0): VESA VBE DDC Level none (II) S3VIRGE(0): VESA VBE DDC transfer in appr. 0 sec. Thu Jun 5 17:36:28 CDT 2003 Thu Jun 5 17:36:59 CDT 2003 Thu Jun 5 17:37:29 CDT 2003 Thu Jun 5 17:37:59 CDT 2003 Thu Jun 5 17:38:29 CDT 2003 Thu Jun 5 17:38:59 CDT 2003 Thu Jun 5 17:39:30 CDT 2003 Thu Jun 5 17:40:00 CDT 2003 Thu Jun 5 17:40:30 CDT 2003 Thu Jun 5 17:41:00 CDT 2003 (II) S3VIRGE(0): VESA VBE DDC read successfully Any Ideas ? The machine is a Netier SL1000 with 128 Mb of Ram, a Cyrix Chip (No Intel) and has an S3 GX2 card with 2Mb of Ram. The Video chip is a 86C375. I Have attached the entire -verbose X bootup in case its needed. Thanks. -- Jorge Adrian Salaices <[EMAIL PROTECTED]> Dallas Airmotive
Thu Jun 5 17:35:28 CDT 2003 This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.2.99.1 / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 15 October 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.7-crypto6 i686 [ELF] Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Jan 3 02:17:33 1999 (==) Using config file: "/etc/XF86Config" (==) ServerLayout "XFree86 Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "My Monitor" (**) | |-->Device "My Video Card" (**) |-->Input Device "Keyboard0" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "Mouse0" (**) |-->Input Device "Mouse1" (WW) The directory "/usr/X11R6/lib/X11/fonts/korean/" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/cyrillic/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/ISO8859-2/misc/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/ISO8859-2/75dpi/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/ISO8859-2/100dpi/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/KOI8-R/misc/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/KOI8-R/75dpi/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/KOI8-R/100dpi/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/ja/misc/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/ja/TrueType/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/ko/TrueType/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/zh_CN/TrueType/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/zh_TW/TrueType/" does not exist. Entry deleted from font path. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/share/fonts/default/Type1/,/usr/lib/openoffice/share/fonts/truetype/,/usr/share/AbiSuite/fonts/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 4 (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.2.99.1, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.2.99.1, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,0597 card 0000,0000 rev 04 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,8597 card 0000,0000 rev 00 class 06,04,00 hdr 01 (II) PCI: 00:07:0: chip 1106,0586 card 1106,0000 rev 41 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 1106,0571 card 0000,0000 rev 06 class 01,01,8a hdr 00 (II) PCI: 00:07:3: chip 1106,3040 card 0000,0000 rev 10 class 06,00,00 hdr 00 (II) PCI: 00:0d:0: chip 8086,1229 card 8086,0001 rev 05 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 5333,8a10 card 0a0a,0a0a rev 06 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set) (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) Host-to-PCI bridge: (II) Bus -1: bridge is at (0:7:3), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) S3 Inc. ViRGE/GX2 rev 6, Mem @ 0xe0000000/26 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xe8000000 from 0xebffffff to 0xe7ffffff (II) Active PCI resource ranges: [0] -1 0 0xed000000 - 0xed0fffff (0x100000) MX[B] [1] -1 0 0xed100000 - 0xed100fff (0x1000) MX[B] [2] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O [3] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B) [4] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B] (II) Inactive PCI resource ranges: [0] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xed000000 - 0xed0fffff (0x100000) MX[B] [1] -1 0 0xed100000 - 0xed100fff (0x1000) MX[B] [2] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O [3] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B) [4] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B] (II) Inactive PCI resource ranges after removing overlaps: [0] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xed000000 - 0xed0fffff (0x100000) MX[B] [6] -1 0 0xed100000 - 0xed100fff (0x1000) MX[B] [7] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O [8] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B) [9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [11] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B] [12] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.2.99.1, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project" compiled for 4.2.99.1, module version = 2.0.1 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font FreeType (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.2.99.1, module version = 1.0.1 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "s3virge" (II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o (II) Module s3virge: vendor="The XFree86 Project" compiled for 4.2.99.1, module version = 1.8.3 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.2.99.1, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.3 S3VIdentify (II) S3VIRGE: driver (version 1.8.3) for S3 ViRGE chipsets: virge, 86C325, virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2, 86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365, trio 3d/2x, 86C362, 86C368 (II) Primary Device is: PCI 01:00:0 S3VProbe begin (--) Assigning device section with no busID to primary device (--) Chipset virge gx2 found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xed000000 - 0xed0fffff (0x100000) MX[B] [6] -1 0 0xed100000 - 0xed100fff (0x1000) MX[B] [7] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O [8] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B) [9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [11] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B] [12] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B] S3VProbe end (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xed000000 - 0xed0fffff (0x100000) MX[B] [6] -1 0 0xed100000 - 0xed100fff (0x1000) MX[B] [7] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O [8] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B) [9] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [10] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [11] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [14] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B] [15] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B] [16] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [17] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. S3VPreInit 1 (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.2.99.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (**) S3VIRGE(0): Depth 16, (--) framebuffer bpp 16 (==) S3VIRGE(0): RGB weight 565 (==) S3VIRGE(0): Default visual is TrueColor S3VGetRec (==) S3VIRGE(0): Using HW Cursor (==) S3VIRGE(0): Using fb. (==) S3VIRGE(0): mx_cr3a_fix. (==) S3VIRGE(0): XVideo allowed (depends on chipset). (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.2.99.1, module version = 1.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.2.99.1, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) S3VIRGE(0): initializing int10 (II) S3VIRGE(0): Primary V_BIOS segment is: 0xc000 (WW) System lacks support for changing MTRRs (II) S3VIRGE(0): VESA BIOS detected (II) S3VIRGE(0): VbeVersion is 512, OemStringPtr is 0xc0000b10, OemVendorNamePtr is 0xc0000b28, OemProductNamePtr is 0xc0000b39, OemProductRevPtr is 0xc0000b43 (II) S3VIRGE(0): VESA VBE Version 2.0 (II) S3VIRGE(0): VESA VBE Total Mem: 2048 kB (II) S3VIRGE(0): VESA VBE OEM: S3 Incorporated. 86C357 (II) S3VIRGE(0): VESA VBE OEM Software Rev: 1.1 (II) S3VIRGE(0): VESA VBE OEM Vendor: S3 Incorporated. (II) S3VIRGE(0): VESA VBE OEM Product: Virge GX2 (II) S3VIRGE(0): VESA VBE OEM Product Rev: Rev B (--) S3VIRGE(0): Chipset: "virge gx2" S3VMapMem S3VEnableMmio (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 S3VPreInit vgaCRIndex=3d4, vgaIOBase=3d0, MMIOBase=4021f000 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.2.99.1, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Reloading /usr/X11R6/lib/modules/libddc.a Thu Jun 5 17:35:58 CDT 2003 (II) S3VIRGE(0): VESA VBE DDC supported (II) S3VIRGE(0): VESA VBE DDC Level none (II) S3VIRGE(0): VESA VBE DDC transfer in appr. 0 sec. Thu Jun 5 17:36:28 CDT 2003 Thu Jun 5 17:36:59 CDT 2003 Thu Jun 5 17:37:29 CDT 2003 Thu Jun 5 17:37:59 CDT 2003 Thu Jun 5 17:38:29 CDT 2003 Thu Jun 5 17:38:59 CDT 2003 Thu Jun 5 17:39:30 CDT 2003 Thu Jun 5 17:40:00 CDT 2003 Thu Jun 5 17:40:30 CDT 2003 Thu Jun 5 17:41:00 CDT 2003 (II) S3VIRGE(0): VESA VBE DDC read successfully (II) S3VIRGE(0): Manufacturer: @@@ Model: 0 Serial#: 0 (II) S3VIRGE(0): Year: 1990 Week: 0 (II) S3VIRGE(0): EDID Version: 0.0 (II) S3VIRGE(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) S3VIRGE(0): Sync: (II) S3VIRGE(0): Max H-Image Size [cm]: H-Size may change, V-Size may change (II) S3VIRGE(0): Gamma: 1.00 (II) S3VIRGE(0): No DPMS capabilities specified; Monochorome/GrayScale Display (II) S3VIRGE(0): redX: 0.000 redY: 0.000 greenX: 0.000 greenY: 0.000 (II) S3VIRGE(0): blueX: 0.000 blueY: 0.000 whiteX: 0.000 whiteY: 0.000 (II) S3VIRGE(0): Manufacturer's mask: 0 (--) S3VIRGE(0): unexpected EDID version 0 revision 0 (==) S3VIRGE(0): Using gamma correction (1.0, 1.0, 1.0) (--) S3VIRGE(0): videoram: 2048k (--) S3VIRGE(0): Detected current MCLK value of 99.432 MHz S3VDisableMmio S3VPreInit minClock=20000, maxClock=270000 (II) S3VIRGE(0): My Monitor: Using hsync range of 30.00-69.00 kHz (II) S3VIRGE(0): My Monitor: Using vrefresh range of 50.00-70.00 Hz (II) S3VIRGE(0): Clock range: 20.00 to 270.00 MHz (II) S3VIRGE(0): Not using default mode "640x350" (vrefresh out of range) (II) S3VIRGE(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "640x400" (vrefresh out of range) (II) S3VIRGE(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "720x400" (vrefresh out of range) (II) S3VIRGE(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "640x480" (vrefresh out of range) (II) S3VIRGE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "640x480" (vrefresh out of range) (II) S3VIRGE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "640x480" (vrefresh out of range) (II) S3VIRGE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "1024x768" (vrefresh out of range) (II) S3VIRGE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "1024x768" (vrefresh out of range) (II) S3VIRGE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "1024x768" (vrefresh out of range) (II) S3VIRGE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "1152x864" (vrefresh out of range) (II) S3VIRGE(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "1280x960" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "1280x960" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "1280x1024" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "1280x1024" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "1280x1024" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "832x624" (vrefresh out of range) (II) S3VIRGE(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "1400x1050" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "1400x1050" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using default mode "1600x1024" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan) (II) S3VIRGE(0): Not using mode "800x600" (no mode of this name) (--) S3VIRGE(0): Virtual size is 1152x768 (pitch 1152) (**) S3VIRGE(0): Mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) S3VIRGE(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (**) S3VIRGE(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz (II) S3VIRGE(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (**) S3VIRGE(0): Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz (II) S3VIRGE(0): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync (**) S3VIRGE(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (II) S3VIRGE(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (**) S3VIRGE(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz (II) S3VIRGE(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (==) S3VIRGE(0): DPI set to (75, 75) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) un 5 17:41:30 CDT 2003 Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.2.99.1, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.1 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.2.99.1, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.2.99.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xe0000000 - 0xe3ffffff (0x4000000) MS[B] [1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [6] -1 0 0xed000000 - 0xed0fffff (0x100000) MX[B] [7] -1 0 0xed100000 - 0xed100fff (0x1000) MX[B] [8] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O [9] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B) [10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B] [16] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B] [17] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [18] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) S3VScreenInit S3VMapMem S3VEnableMmio (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 S3VSave ViRGE driver: saved current video mode. Register dump: (II) S3VIRGE(0): START register dump ------------------ Misc Out[3CC] 67 CR[00-2f] 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 3f ff 9c 0e 8f 28 1f 96 b9 a3 ff ff ff ff ff ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 8a 10 06 SR[00-27] 03 00 03 00 02 05 06 07 06 00 80 00 0c 02 00 00 27 7b 61 28 00 03 c9 10 00 00 00 1f 00 00 04 00 00 00 c2 36 c2 3d 44 08 Gr Cont GR[00-0f] 00 00 00 00 00 10 0e 00 ff f9 fa fb fc fd fe ff Att Cont AR[00-1f] 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f 0c 00 0f 08 00 35 36 37 0c 00 0f 08 00 3d 3e 3f CR[30-6f] e1 05 40 80 00 00 ff fb 7b bd 05 00 10 06 1f 40 00 04 04 00 00 00 01 89 89 25 00 ff f7 ff c0 c0 00 00 90 08 00 00 00 00 03 e0 00 00 00 00 00 00 00 00 00 00 00 00 80 00 ff e0 c0 01 09 01 fd fd (II) S3VIRGE(0): END register dump -------------------- S3VModeInit S3VModeInit dclk=40000 S3VInitSTREAMS S3VWriteMode S3VGEReset sub_stat=b000 (II) S3VIRGE(0): ViRGE driver: done restoring mode, dumping CR registers: (II) S3VIRGE(0): START register dump ------------------ Misc Out[3CC] 2f CR[00-2f] 7f 63 63 82 69 19 72 f0 00 60 00 00 00 00 00 00 59 2d 57 20 00 57 00 c3 ff ff ff ff ff ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 8a 10 06 SR[00-27] 03 01 0f 00 0e 05 06 07 06 00 80 00 0c 02 00 00 27 7b c1 41 00 83 c9 10 00 00 00 1f 00 00 04 00 00 00 c2 36 c2 3d 44 08 Gr Cont GR[00-0f] 00 00 00 00 00 40 05 0f ff f9 fa fb fc fd fe ff Att Cont AR[00-1f] 60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f 41 00 0f 00 00 35 36 37 41 00 0f 00 00 3d 3e 3f CR[30-6f] e1 8c 40 a0 00 00 ff fb 7b bd 95 74 3f 06 3c 40 00 04 04 00 00 00 01 89 89 25 00 ff f7 ff c0 c0 00 10 90 08 00 10 00 00 12 e0 00 00 00 00 40 40 00 00 00 10 10 10 99 54 ff e0 c0 01 09 01 fd fd (II) S3VIRGE(0): END register dump -------------------- (**) S3VIRGE(0): Using FB (II) S3VIRGE(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Solid Horizontal and Vertical Lines Image Writes Offscreen Pixmaps Setting up tile and stipple cache: 9 128x128 slots (==) S3VIRGE(0): Backing store disabled (==) S3VIRGE(0): Silken mouse enabled S3VDGAInit S3VDGAInit firstone vpWid=800, vpHgt=600, Bpp=2, mdbitsPP=16 S3VDGAInit firstone vpWid=1024, vpHgt=768, Bpp=2, mdbitsPP=16 S3VDGAInit firstone vpWid=1152, vpHgt=768, Bpp=2, mdbitsPP=16 S3VDGAInit firstone vpWid=1024, vpHgt=768, Bpp=2, mdbitsPP=16 S3VDGAInit firstone vpWid=640, vpHgt=480, Bpp=2, mdbitsPP=16 S3VHWCursorInit (II) S3VIRGE(0): Using overlay video (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Keyboard "Keyboard0" handled by legacy driver (**) Option "Protocol" "PS/2" (**) Mouse0: Protocol: "PS/2" (**) Option "AlwaysCore" (**) Mouse0: always reports core events (**) Option "CorePointer" (**) Mouse0: Core Pointer (**) Option "Device" "/dev/psaux" (**) Option "Buttons" "3" (**) Option "Emulate3Buttons" "off" (**) Option "ZAxisMapping" "4 5" (**) Mouse0: ZAxisMapping: buttons 4 and 5 (**) Mouse0: Buttons: 5 (**) Option "Resolution" "400" (**) Mouse0: Resolution: 400 (**) Option "BaudRate" "1200" (**) Mouse0: BaudRate: 1200 (**) Option "Protocol" "PS/2" (**) Mouse1: Protocol: "PS/2" (**) Option "AlwaysCore" (**) Mouse1: always reports core events (**) Option "CorePointer" (**) Mouse1: Core Pointer (**) Option "Device" "/dev/input/mice" (EE) xf86OpenSerial: Cannot open device /dev/input/mice No such file or directory. (EE) Mouse1: cannot open input device (EE) PreInit failed for input device "Mouse1" (II) UnloadModule: "mouse" (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (**) Option "Device" "/dev/psaux" select returned 1 select returned 1 select returned 1 select returned 1 select returned 1 succeeded Warning: font renderer for ".pfa" registered more than once Warning: font renderer for ".pfb" registered more than once Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list! Thu Jun 5 17:42:00 CDT 2003 select returned 0 select returned 0 select returned 0
