On Sat, 14 Jun 2003, Bruno Luciani wrote:
> I am ready to burn my own rom
>
> but : which is the correct type of chip for my card ?
>
>
> the rom is a rtl8139 10ec rom
>
> It's correct to use a 27c128 eprom chip ?
>
> which time access is necesary: 120ms may be ?
The 27c128-120 chip should work just fine for an rtl8139
card. I've done lots of those cards with that exact chip.
Some of the rtl8139 cards have a 28-pin socket, and some
have a 32-pin socket. The same chip should work in both
cases.
Take a look at:
http://www.ltsp.org/documentation/eproms.txt
for more info, and a small diagram showing how to insert
the 28-pin chip into a 32-pin socket.
Hope that helps,
Jim McQuillan
[EMAIL PROTECTED]
-------------------------------------------------------
This SF.NET email is sponsored by: eBay
Great deals on office technology -- on eBay now! Click here:
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
