I changed from a parallel to a USB printer on a client and I was amazed
at how easy it was to swap:
#
# PRINTER_0_DEVICE = /dev/lp0
# PRINTER_0_TYPE = P
#
MODULE_01 = usb-uhci
MODULE_02 = printer
PRINTER_0_DEVICE = /dev/usb/lp0
PRINTER_0_TYPE = S
John
On Sat, 13 Sep 2003 12:18:08 +0530
Sudev Barar <[EMAIL PROTECTED]> wrote:
> I am running a parallel port printer on thin client. The new printer
> is a USB printer that has run on the server so drivers / configuration
> issues are known. Now I have to put this printer on a client.
> Any pointers / help? Would welcome a snip of your lts.conf etc. for
> getting this underway.
> --
> Sudev Barar
>
> Learning Linux
>
>
>
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _____________________________________________________________________
> Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> For additional LTSP help, try #ltsp channel on irc.freenode.net
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
