On Sat, 2003-09-13 at 18:25, Julius Szelagiewicz wrote: > On Sat, 13 Sep 2003, Sudev Barar wrote: > > I am running a parallel port printer on thin client. The new printer is > > a USB printer that has run on the server so drivers / configuration > > issues are known. Now I have to put this printer on a client. > > Any pointers / help? Would welcome a snip of your lts.conf etc. for > > getting this underway. > Sudev, here is the snippet: > # usb printer > # MODULE_01 = usb-ohci #or usb-uhci, as the case may be > # MODULE_02 = printer > # PRINTER_0_DEVICE = /dev/usb/lp0 > # PRINTER_0_TYPE = S
Have followed the script above. Now problem is that I am using HP1005 hard printer that has to be initialized on power on by giving command: /bin/cat /usr/share/foo2zjs/firmware/sihp1005.dl > /dev/usb/lp0 This worked fine if the printer is attached to the server as the /dev/usb/lp0 is clearly the path. However what should be the path on the LTSP client?? This is a needed step in case I have to use this printer. TIA -- Sudev Barar Learning Linux ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
