Hi all. I have a Compaq Deskpro which I am trying to use as an LTSP system. I have a Linksys ethernet card in it with a disklessworkstations.com etherboot (p)rom. This card is working fine, (works in all the other boxes its been in).
My guess is that somehow this card cannot/is not interacting properly with the Compaq system. When I trace the LAN, No traffic from this card shows up, doesn't matter if there is anything else running on the LAN or not But when I power up the Compaq I get this: bootrom v1.5 etherboot/21 v4.6.12 (GPL) Rom segment 0XC800 length 0X4000 reloc 0X9800 etherboot/21 v4.6.12 (GPL) for tulip found ADMtek Centaur-P at 0x1400 Rom address 0x0000 Probing,,, (Tulip)Tulip [ My mAC addr} at ioaddr 0x1400 TX Setup Timeout! searching for server 9DHCP)... TX Timeout! <sleep> TX Timeout! <sleep> TX Timeout! <sleep> TX Timeout! <sleep> . . I googled for "ltsp tx timeout" but didn't find anything helpful. Does anyone have any suggestions or pointers to info that may help? Thanks -- Jeff Kinz, Open-PC, Emergent Research, Hudson, MA. [EMAIL PROTECTED] copyright 2003. Use is restricted. Any use is an acceptance of the offer at http://www.kinz.org/policy.html. Don't forget to change your password often. ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
