Roland,
Did you tell CUPS that the printer is on a JetDirect interface
at port 9100 ?
That's what you need, because the lp_server daemon acts just like
an HP JetDirect printer server.
To test that the printer is actually working, you can
try this:
telnet 192.168.100.6 9100
Then, whatever you type should appear on the printer.
Press Ctrl-J to advance a line and Ctrl-L to do a form-feed.
When done with that test, Ctrl-] and 'q' to quit.
Jim McQuillan
[EMAIL PROTECTED]
On Wed, 3 Dec 2003, roland gaulon wrote:
> bonjour
> I tried to install a printer on a workstation running ltsp 3.0 with a
> server mandrake 9.2
> i modified the cups configuration of the printer running quite well on
> the server to print with the remote similar printer by only changing
> the location: 192.168.100.6
> then i modified the lts.conf adding 2 lines:
> PRINTER_0_DEVICE = /dev/lp0 and
> PRINTER_0_TYPE = P
> i got no printing and i did not see where spooling is made, but
> something was sent out from the server ethernet interface.
> what did i do wrong?
> thanks for your help
>
>
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by OSDN's Audience Survey.
> Help shape OSDN's sites and tell us what you think. Take this
> five minute survey and you could win a $250 Gift Certificate.
> http://www.wrgsurveys.com/2003/osdntech03.php?site=8
> _____________________________________________________________________
> Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> For additional LTSP help, try #ltsp channel on irc.freenode.net
>
-------------------------------------------------------
This SF.net email is sponsored by OSDN's Audience Survey.
Help shape OSDN's sites and tell us what you think. Take this
five minute survey and you could win a $250 Gift Certificate.
http://www.wrgsurveys.com/2003/osdntech03.php?site=8
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
